pouseayar XLB-5T1636 5 Tier Wire Shelving Rack Instruction Manual

pouseayar XLB-5T1636 5 Tier Wire Shelving Rack

Product Information

The 5-Tier Wire Shelving Rack (Model: 5T-1636) is a sturdy and versatile storage solution for organizing your belongings. With a maximum weight capacity of 350lbs per shelf when weight is equally distributed, this shelving rack provides ample space for storing various items. The entire unit has a maximum weight capacity of 1750 lbs when equally distributed on the feet levelers.
It is important to follow the instructions provided to ensure safe usage of the product. Failure to do so may result in serious injury or harm to yourself and others. Some parts of the product are heavy and/or have sharp edges, so it is essential to install them carefully to avoid any accidents.

Specifications

• Model: 5T-1636
• Maximum Weight Capacity per Shelf: 350lbs
• Maximum Weight Capacity (Entire Unit): 1750lbs

Product Usage Instructions

Assembly Instructions

Take the bottom pole (D) and snap two halves of a tapered lock (B) at the desired height, with the tapered end facing up. Repeat this step for all bottom poles, ensuring that the tapered locks are installed at the same grooved line on each bottom pole.
Attach the top pole (C) onto the bottom pole (D) by screwing them together. Hand tightens the connection.
Rest the shelf (A) on its side and insert the bottom poles (D) through the corner holes of the shelf.
Turn the assembly upright and firmly push the shelf (A) onto the tapered locks (B). Make sure the lip of the shelf is facing down and the levelers (F) on the bottom poles (D) are in contact with the floor.

1. Repeat steps 1-3 for the remaining shelves.
2. Place the shelf liner on top of each shelf to provide a stable surface for your items.

Package Contents

• 5 x Shelf (A)
• 40 + 2 extra x Tapered Lock (B)
• 4 x Connector (maybe already attached to C or D)
• 4 x Feet Leveler (G)
• 4 x Top Pole (with pole cap and pole connector preassembled) (H)
• 4 x Bottom Pole (with feet leveler preassembled) (D)
• 16 x Black plastic spacer (Note: Discard these spacers as they are only for packing purposes, not for assembling)
• 5 x Shelf liner (A)

Frequently Asked Questions (FAQ)

• Q: What is the maximum weight capacity of each shelf?
  A: Each shelf has a maximum weight capacity of 350 lbs when the weight is equally distributed.

• Q: Can I stand or climb on the shelving unit?
  A: No, it is not recommended to stand or climb on the shelving unit for safety reasons.

• Q: How should I arrange the items on the shelves?
  A: Place heavier items on the lower shelves and lighter ones on the top shelves to maintain stability and prevent tipping.

Warning:

• Maximum weight capacity per shelf is 350lbs when weight is equally distributed. Maximum entire unit weight capacity is 1750lbs when equally distributed on feet levelers.
• Failure to follow these instructions may result in serious injury or death of yourself and people around you. Some of the part are heavy and/or has shaped edge, please install it carefully to avoid hurt yourself and people around you.

Caution:
Do not stand on or climb on the shelving unit. Place heavier items on lower shelves and lighter ones on top shelves.

PACKAGE CONTENTS

( NOTE : Discard the black plastic spacers G. These between each shelf are only for packing purpose , not for assembling.)

ASSEMBLY INSTRUCTIONS

1. With the tapered end facing up, snap the two halves of a tapered lock (B) at the desired height on bottom pole (D). Repeat for the remaining bottom poles (D), making sure the tapered locks (B) are installed at the same grooved line on each bottom pole (D).
   Attention ：The tapered must be fixed to the groove on the pole, and make sure the tapered does not slip before installing the shelf

2. Rest shelf (A) on its side, then insert the bottom poles (D) through the corner holes of the shelf (A).

3. Turn assembly upright and push the shelf (A) firmly onto the tapered locks (B). Note: Make sure the lip of shelf (A) is facing down and the levelers (F) on bottom poles (D) are on the floor.

4. Repeat steps 1-3 for the second shelf (A).

5. Screw top pole (C) onto bottom pole(D), hand tighten.

6. Repeat steps 1-3 for the remaining shelves.

7. Place the shelf liner on top of the shelf。 Finish

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>