SCHLAGE L9000-Series Gen 2 Indicator Lock Case User Guide
- May 15, 2024
- Schlage
Table of Contents
Return to Index
L9000-Series Gen 2 Indicator
Lock Case Dimensions
L9000-Series Gen 2 Indicator Lock Case
Case Size: 4. 438″ x 6.063″ x 1″ (113 mm x 154 mm x 25 mm)
Backset: 2.750″ (70 mm)
Door Range: 1.375″ – 2.500″ (35 mm–64 mm)
Lock Front: 1.250″ x 8″ x .219″ (32 mm x 203 mm x 6 mm) Standard 1.063″ x
8″ x .219″ (27 mm x 203 mm x 6 mm)
Knob or Lever to Cylinder: 3.859″ (98 mm)
Knob or Lever to Turn Piece: 2.719″ (69 mm)
Height Line to Center of Deadbolt: 3.031″ (77 mm)
HOLES:
A Cylinder cut-out
B Turn piece and occupancy indicator
C Knob or lever cut-out
D Mounting holes
NOTES:
- Dimensions are maximum for the product.
- Templates are not to scale.
- Standard strike is shown on each template for dimensions only.
- Dimensions do not provide allowances for door silencers, weather stripping, sound proofing or other additions to door or door frames.
ANSI Standards: L9000-Series locks meet all requirements for
installations in doors and frames prepared in accordance with ANSI
specifications A156.13, 2012.
Metal Doors: Suitable reinforcement is required to support lock case in
center of door and to prevent door from compressing when trim is tightened.
(See ANSI A115.1)
Thick Doors: Locks for non-standard door thickness may require special
instructions.
Lead Lining: When L9000-Series locks are ordered with lead lining, add
1/8 ” (3) to the width of the mortise cut-out on the lock case cover side of
installation.
Dimensions shown in parentheses () are in millimeters.
Drawing not to scale.
© 2024 Allegion
LG1 Rev. 03/24
www.allegion.com/us
Door preparation template
LG1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>