Qianyan Technology H1199 Thermo Probe User Manual
- May 15, 2024
- Qianyan Technology
Table of Contents
Qianyan Technology H1199 Thermo Probe
USER MANUAL
Model：H1199
FCC ID：2A7VD-H1199
Skin：Ceramic casing；Glass light guider
Color：white/black optiona
The Thermo-Probe is a wireless temperature probe designed for measuring meat temperature and grill inner ambient air contact section. It utilizes BT5.0 signal for data exchange and comes with a rechargeable battery for convenient use.
Key Features:
- LED indication for work status, wireless connection, battery level, and temperature alerts
- Data exchange via BT5.0 signal with specified protocol
- 5mAh 2.4V rechargeable battery with fast 10-minute recharge time
- Automatic power-off in low battery status to protect battery life
Engineering Parameters:
- Maximum Charging Current: 10C (50mA)
- Probe Working Ambient Temperature:
- I. Meat Temperature Measuring Section: 0~85°C (32~185°F), up to 105°C (221°F) in short term
- II. Grill Inner Ambient Air Contact Section: 0~300°C (32~572°F)
- Temperature Accuracy:
- +/-1°C @ -20-100°C
- +/-2°C @ 100-200°C
- +/-5°C @ 200-300°C
- Storage Temperature Range: -20~60°C (-4~140°F)
- BT Connection Distance:
- I. 10m @ open air, no interference signal
- II. Battery Life: 3000 charge cycles with end life at 70% capacity
- III. Working Duration: 12 hours from fully charged status
Specifications
- Model: H1199
- FCC ID: 2A7VD-H1199
- Skin: Ceramic casing
- Material: Glass light guider
- Color: White/Black (optional)
FCC Radiation Exposure Statement:
– The product complies with the FCC portable RF exposure limit for an uncontrolled environment and is safe for intended operation.
WARNING:
Any changes or modifications not approved by the responsible party could void the user’s authority to operate this equipment.
Product Usage Instructions
Charging the Probe:
– Place the probe in the dock for automatic charging. The wireless connection is disabled during charging.
Temperature Measurement:
– Insert the probe into the meat or grill section to measure the temperature accurately.
FAQ
Q: How long does it take to fully charge the probe?
A: The probe takes approximately 10 minutes for a full recharge when placed in the dock.
Q: What is the working duration of the probe on a full charge?
A: The probe can work continuously for up to 12 hours on a full charge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>