V I V O DESK-V028KB 28 Inch Desk Converter Instruction Manual

V I V O DESK-V028KB 28 Inch Desk Converter Instruction Manual

SKU: DESK-V028KB SERIES

DESK-V028KB
DESK-V028KA
DESK-V028KF

DESK-V028KN
DESK-V028KW

Assembly Video & Product Info
K Series Standing Desk Converter

CAUTION!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

We’re Here for You
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can oer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

Package Contents

Included Hardware & Tools

ASSEMBLY STEPS

STEP 1

Apply Pads (D) to underside of Keyboard Tray (B). Assemble Stopper (C) to Kayboard Tray (B) using ST4.2x12mm Screws (S-A) and a Phillips screwdriver.

STEP 2

Install Rubber Feet (E) to the bottom of Desk (A). Remove shipping tie from desk and set right side up on solid surface. NOTE: DO NOT squeeze the handle on Desk (A) while cutting the shipping tie.

STEP 3

Raise Desk (A) by lifting the handle on the right side of the frame.

STEP 4

Apply Cable Clips (F) to underside of Desk (A).

Desk riser is now ready for use

Press side lever to raise or lower your desk riser.

When lowering without any weight on the desktop, lightly press down on riser as you lower it to allow for a smoother lowering process. If it feels diicult to lower aer placing laptop and other intended setup items, apply light pressure to lower smoothly or add additional weight.

Please note the 33lb weight capacity when adding weight.

GROMMET MOUNT USE

This desk riser features a pre-drilled grommet hole for installing a monitor mount directly to desk surface.

To utilize this feature, your will need to remove the plug from the top surface of the riser. Secure your mount using a grommet mounting method, using the hardware and assembly steps from your monitor mount.

TENSION ADJUSTMENT

If your desk riser lifts up or down too easily, or is too difficult, the gas spring cable can be adjusted to your desired tension. The adjustment is located at the base of your riser.

Start by loosening the Upper (1) and Lower (2) Nuts using an adjustable wrench. Loosen Nuts until they are both on the opposite ends of the Gas Spring Cable.

TENSION CONT’D

Option A:
Desk Is Difficult to Raise/Lower | Increase Tension

If the desk feels difficult to raise and lower, you will need to increase the Gas Spring Cable tension. Gently pull the cable away from the Lever until the Inner Nut (2) is firmly pressed against the middle divider.

Failure to follow these instructions may result in property damage and/or personal injury.

Read More About This Manual & Download PDF:

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>