Intezze CLIQ TWS Earphones User Manual
- June 8, 2024
- Intezze
Table of Contents
User Manual
Intezze CLIQ TWS Earphones
Product Diagram
- Microphone
- Microphone
- LED indication
- Touch control area
- Ear tip
- LED indication
- Charging case
- USB-C charging interface
Pairing
After being taken out from the charging case, the earphones will be paired automatically.
Pairing with the smartphone :
- Take out the earphones from the charging case and confirm that the earphones are waiting to be paired. At this time, the two earphones flash blue lights quickly.
- Turn on the smartphone’s Bluetooth, search Bluetooth devices and click ‘CLIQ’.A voice prompt as ‘Connected’ will sound then.
- After the pairing is successful, take out the earphones from the charging case and they will pair with the smartphone automatically
Powering ON / OFF
Power ON
Method 1: Take out the earphones from the charging case, the earphones
will auto-boot.
Method 2: In the off state,press and hold the touch area of the earphones
for 1 seconds, the earphones will turn on, and you can hear the prompt “power
on”.
POWER OFF
Method 1: Put the earphones into the charging box. They will shut down
automatically.
Method 2: Turn off the Bluetooth switch of mobile phone, and the earphone
will automatically shut down in five minutes.
Method 3: Turn off the Bluetooth switch on your mobile phone, press the
earphone for 1 second and the earbuds will shut down.
Listen to the music
- Play / Pause: Touch the left or right earphone twice gently.
- Previous: Press and hold the touch area of the left earphone for 2 seconds.
- Next: Press and hold the touch area of the right earphone for 2 seconds.
- Volume +: Touch the right earphone once gently.
- Volume -: Touch the left earphone once gently
Calling
- Answer call: Touch the left or right earphone once gently
- Hang up: Touch the left or right earphone twice gently.
- Cancel dialing: During dialing, press the left or right earphone for 2 seconds.
- Reject call: Press the left or right earphone for 2 seconds.
Voice assistant
Wake up / Cancel voice assistant: Touch the left or right earphone three times gently.
RESET function
- Delete the connection between the earphone and the phone.
- Take out both earbuds from the case and once the are flashing blue, tap 5x quickly the right earbud and then 5x the left earbud. LED indication on both earbuds goes out, then it starts flashing red / blue alternately and finally it starts flashing blue.
- Now you can repeat the pairing process with your phone.
Charging
The earbuds and the charging case need to be fully charged prior to first use!
Earphones: Put the earphones into the charging box, the charging case will automatically charge the earphone, and the earphone will display a red light when charging.
Charging case: Use the included USB-C cable to charge the case.
LED indication on the earbuds
LED indication on the case
Voice prompts
Special instructions
- Apple iPhones and some Android phones can support the adjustment of phone volume if you need to use headphones to adjust the volume; but for some Android phones, you can only adjust the volume of earphone itself. If you need to restore the default volume, put the earphones in the charging box and take them out after the red light turns on.
- When holding the earphone, do not touch the touch panel area of the earphone to avoid misoperation.
Precautions
- The case with earbuds need to be fully charged prior to first-time use.
- If the earbuds are left unused for over two weeks, please recharge the case with earbuds periodically.
- Listen with the volume setting as low as possible. Listening at high volume for an extended period may result in permanent damage to your hearing.
- Keep your earphones and accessories out of reach of children.
- Children should use the earphones only under adult supervision.
- Do not expose the earphones to water for a prolonged period. Do not use it when swimming, diving, or in the shower.
- Using your earphones in a moist or dusty environment, or near a strong magnetic field, may result in an internal circuit failure.
- Do not store your earphones in an environment where the temperature is below – 15°C or above +S0°C.
- Do not charge the earphones and the charging case in an environment where the temperature is below 0°C.
- Do not expose your earphones or charging case to direct sunlight (such as on a window sill or on a car dashboard) for an extended period of time.
- To avoid damage to your earphones, do not disassemble or tamper with them, and do not insert any foreign matter into them.
All information in this document is subject to change.
Read More About This Manual & Download PDF:
Intezze CLIQ TWS Earphones User Manual – Optimized PDF
Intezze CLIQ TWS Earphones User Manual – Original PDF
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>