iON Wireless Duo Wireless Charging Stand and Pad User Manual
- June 8, 2024
- iOttie
Table of Contents
User Manual
iON Wireless Duo Wireless Charging Stand and Pad
Getting Started
For an optimal charging experience, please follow the detalled Instructions In this manual when using the ION Wireless Duo.
Compatiblllty
Please make sure your device Is QI Wireless compatible. Compatible devices
Include:
Google
Plxal 5, 4, 4XL. 3, 3XI.
Appia iPhone 11, 11 Pro, 11 Pro Max, XR, XS, XS Max, X. 8 and 8 Plus QI- Wireless enebled Alrpods end compatlble Alrpods aises
Samsung
Galaxy S20 Ultra, S20+, S20, Z Flip, Fold, Note 10+, Note10, S10, S10e, S10+, Note 9, S9, S9+, Note8, S8, S8+, S7 edge, S7, S6 edge+, Note5, S6 edge and S6 Any Qi-enabled devices or accessories
Please only use the included cable and power adapter. Third party components may impact wireless charging performance.
Exploring
What’s In the Box?
Key Features
Dual Qi Wireless Charging Wirelessly charge two devices simultaneously with the charging stand or pad.
Charging Qi Wireless Accessory Devices
Also an accessory charger for wireless charging earbuds, and any Qi-enabled wireless device or accessory
Charging Speeds
Engineered to deliver charging speeds of up to 15W for Android, and 7.5W for iPhone. Dual Qi-Coil charging stand for wireless fast charging smartphones plus flat rubberized Qi wireless charging zone for smartphones and Qi enabled accessories.
Ideal Viewing & Charging Convenience
Draft messages, browse the web, manage music in portrait mode. Or charge phone horizontally in landscape mode to watch videos, edit photos, and more.
Included DC Cable & Adapter
- Plug Charging Cable into the DC port on the back of the iON Duo.
- Plug the Power Adapter into a wall outlet. Both Charging Indicators will turn on and then fade, to inform you the iON Duo has received power.
Please only use the included cable and power adapter. Using third party components may impact wireless charging performance.
Qi Alignment Guide
Use the guide below to receive an efficient wireless fast charge
Qi Coil Location
The Qi coil is generally found in the center of most smartphone models.
Smartphone Alignment (Stand) The charging stand has portrait and landscape charging modes.
Portrait Charging Line up center of smartphone vertically to charging surface and rest device on Anti-Slip Foot until a charging connection is found.
Landscape Charging Line up center of smartphone horizontally to charging surface and rest device on Anti-Slip Foot until a charging connection is found.
Rest your smartphone on the charging surface parallel to the Charging Stand
Using the Anti-Slip Foot (Stand) The Anti-Slip Foot comes built-in on the stand portion of the iON Duo.
Pixel Buds Alignment (Pad) Place Pixel Buds on the designated charging pad. The cap opening should be placed perpendicular with the laser etched line on the pad. The Plus sign on the pad is where the center of the Qi coil is on both your Pixel Buds and the charging pad
Rest your smartphone or Qi-wireless accessory device on the charging surface parallel to the Charging Pad.
Troubleshooting
Your device’s screen will show that it is charging. If your device is not charging, please check the corresponding Charging Indicator on the front of the device.
Fading White Light When powered on, light will appear briefly then fade.
Please contact customer service at[email protected] if you have any questions or need support.
Specifications
iON Wireless Duo
Wall Charger
Declaration of Conformity (FCC)
This device complies with Part 18 of the FCC Rules,
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
NOTE: This equipment has been tested and found to comply with the limits for a wireless power transfer, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product has been certified by iOttie to meet Google’s compatibility standards. Google is not responsible for the operation of this product or its compliance with any applicable safety or other requirements, Learn more at g.co/madeforgoogle.
Google’s “made for” badge, “Pixel,” and related marks are trademarks of Google LLC.
RF exposure statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Operational Warnings
- During the charging process, the transfer of electricity gives off heat. Your device may become warm, but should not become exceedingly hot.
- If the device gets wet, please cease charging immediately. Remove all plugs and dry the product completely. Device is only to be operated in a dry, indoor environment.
- Please be careful of excessive drops, dents, punctures, or deformities on the device. If you are concerned, please unplug the device and contact the manufacturer.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Operating this device in a hot environment or in direct sunlight for a long period of time may cause malfunctions. We recommend keeping the product in cooler temperatures.
- Please use included components for an optimal experience. To support Qi fast charge when using a third party. Power Adapter use a minimum output of 19V 1.8A or 19V with higher amp.
- If your phone is misaligned when wireless charging, your device may become warm due to inefficient wireless output. It is important to always properly align your smartphone.
- California Proposition 65: This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.
Caution Old electrical appliances must not be disposed of together with residual waste, but have to be disposed of separately.
If you love your iOttie product, let us know by leaving a review online, or connect with us on our social platforms.
Read More About This Manual & Download PDF:
iON Wireless Duo Wireless Charging Stand and Pad User Manual – Download
[optimized]
iON Wireless Duo Wireless Charging Stand and Pad User Manual –
Download
Questions about your Manual? Post in the comments!