LUMASCAPE LS9142 Quadralux Q4 Foundation Spotlight Installation Guide

LUMASCAPE LS9142 Quadralux Q4 Foundation Spotlight

• Please read and follow all safety instructions carefully. Failure to do so will void warranty.

WARNING – Product Warranty is void if product is not installed as per installation instructions and in compliance with all local and provincial codes.

• Ensure installation complies with local electrical rules and regulations.
• All electrical work must be performed by a licensed electrician.
• Protective earth; protective ground (symbol 7).
• All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting luminaire as it may become hot.
• Luminaire should only be used complete with protective shield. If protective shield is cracked, immediately stop using luminaire. Isolate light source, keep it dry and immediately contact Lumascape for replacement of protective shield (symbol 10).
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
• The light source contained in this luminaire shall only be replaced b Lumascape or their service agent.
• Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 55′ (17 m) is not expected (symbol 13)
• Basic insulation has been maintained between line voltage and the control conductors.
• To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
• Ensure mains input power is surge protected.
• Never make or break connections while the circuit is energized.
• Do not make modifications or alter the product.
• Keep luminaire clean and free of debris.
• Only clean with warm water.
• Do not use chemicals or abrasives to clean luminaire as this may void the product warranty.
• Connections are to be kept clean and dry at all times.
• Suitable for use indoors or outdoors.
  • MODEL LS9142
  • PART NUMBER LS9142 – 48D xxx 84 xx 01 xx xx xxx LS9142 – 48D xxx 84 xx 09 xx xx xxx
  • INSTALLATION TYPE FLOOD/SPOTLIGHT
  • IP RATING IP66/67 (Passes IP68 Test)
  • SUPPLY VOLTAGE 220-240 ~Vac, 50 Hz 120/277 ~Vac, 60 Hz
  • INSTRUCTIONS COVER Single Color (Non-Dimmable) Single Color Dimming (Dali, 0-10 V)
  • DIMENSIONS (LxWxH) 13.0″ x 3.4″ x 9.0″ (330 x 84 x 228 mm)
  • WEIGHT 7.0 lbs (3.2 kg)
  • MAX. PROJECTED AREA 0.3 ft² (0.1 m²)

Tools Required

Included Components

• Composants inclus

• Instructions
• Luminaire
• 6 mm Allen Key
• Bracket
• Washer Plate
• Lanyard Attachment

CAUTION Risk of Electric Shock

• Do Not Use Power Tools on Screws
• Keep Away from Flammable Materials
• Do Not Use Silicone On Outside Surface
• Keep Electronics Free From Dirt and Moisture
• Do Not Hose or Pressure Clean
• Do Not Cut Cable to the Luminaire

Assembly Instructions

Lanyard

Mounting

Wiring Designations

Do not Hi-Pot test

• Designation Color
• Active Brown
• Neutral Blue
• Earth Green / Yellow
• Not Used Black

Do not Hi-Pot test

DALI (5-Core) – International

• Designation Color
• Active Brown
• Neutral Blue
• Earth Green / Yellow
• DALI + Grey
• DALI – Black

Do not Hi-Pot test

Non-Dimmable (4-Core) – North America

• Designation Color
• Active Black
• Neutral White
• Earth Green / Yellow
• Not Used Grey or Red

Do not Hi-Pot test

0-10 V (5-Core) – North America

• Designation Color
• Active Black
• Neutral White
• Earth Green / Yellow
• 0-10 V + Purple
• 0-10 V – Grey

Do not Hi-Pot test

Dimensions

• Find more product resources at lumascape.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>