ZPE-BCON-U05 Alarm Free Singal Beacon Installation Guide
- June 3, 2024
- ZPE
Table of Contents
ZPE-BCON-U05 Alarm Free Singal Beacon
Product Specifications
HARDWARE
- Visual Status Solid / Blinking
- Notifications Red, Green, and Blue LED
- Supply Power
- Requirements 12V via USB cable
- Audio Alarm None
- Color Black base. Clear light.
- Cable Attached. 3 meters (10 feet)
DESCRIPTION
With the ZPE Alarm-Free USB Signal Beacon, you can visually determine which systems need attention. The sensor provides several colors as visual indicators of problematic devices and systems. It is fully controllable and powered via a USB port. Control and read status with CLI, Web, SNMP or Restful APIs.
Let’s set up your Alarm-Free Signal Beacon
- Connect the beacon to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
- Ensure minimum Nodegrid OS version meets sensor requirements. 2 Upgrade Nodegrid OS to minimum version 5.4.1
- For more information, visit the “Sensor Quick Install Guide” section at: 3 https://www.zpesystems.com/user-manuals/
We suggest placing this product here
All rights reserved. September 8, 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>