ZPE-AIR-U01 Airflow and Temperature Sensor (USB) Installation Guide
- June 3, 2024
- ZPE
Table of Contents
ZPE-AIR-U01 Airflow and Temperature Sensor (USB)
Product Specifications ZPE-AIR-U01
HARDWARE
- Velocity Range 0.15 to 1.0 m/s (30 to 200 fpm)
- Operating Temperature 0°C to 60°C (32°F to 140°F)
- Supply Power Requirements 4.5–12 VDC, 35mA
- Cable Attached. 4 meters (13 feet)
DESCRIPTION
This sensor immediately notifies you when there is a lack of device airflow. This provides highly precise readings (up to 200 fpm) via a digital interface – ensuring you instantly know when a device’s fan slows down or fails. Control and read status with CLI, Web, SNMP, or Restful APIs.
Quick Install Guide ZPE-AIR-U01
Let’s set up your Airflow & Temperature Sensor
-
Connect the sensor to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
-
Ensure minimum Nodegrid OS version meets sensor requirements. Upgrade Nodegrid OS to minimum version 5.4.1
-
For more information, visit the “Sensor Quick Install Guide” section at: https://www.zpesystems.com/user-manuals/
-
OPTIONAL: To configure data collection in ZPE Data Lake, refer to Appendix C in the latest ZPE Cloud Manual at:
zpesystems.com/user-manuals/
We suggest placing this product here
*Rack cage may be a different model or size All rights reserved.
September 8, 2022
References
- User Manuals - ZPE Systems - Rethink the Way Networks are Built and Managed
- User Manuals - ZPE Systems - Rethink the Way Networks are Built and Managed
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>