ZPE-AIR-U02 Airflow and Temperature Sensor Installation Guide
- June 3, 2024
- ZPE
Table of Contents
ZPE-AIR-U02 Airflow and Temperature Sensor
Product Specifications
HARDWARE
- Velocity Range: 0.5 to 10.0 m/s (100 to 2,000 fpm)
- Operating Temperature: 0°C to 60°C (32°F to 140°F)
- Supply Power Requirements: 4.5–12 VDC, 35mA
- Cable Attached: 4 meters (13 feet)
DESCRIPTION
Use this sensor to prevent downtime due to HVAC failure. This airflow and the temperature sensor provides highly precise readings (up to 2,000 fpm). Immediately know when and where your HVAC systems have slowed or failed, then quickly respond to prevent downtime. Control and read status with CLI, Web, SNMP or Restful APIs.
Let’s set up your Airflow & Temperature Sensor
- Connect the sensor to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
- Ensure minimum Nodegrid OS version meets sensor requirements. 2 Upgrade Nodegrid OS to minimum version 5.4.1
- For more information, visit the “Sensor Quick Install Guide” section at: 3 https://www.zpesystems.com/user-manuals/
- OPTIONAL: To configure data collection in ZPE Data Lake, refer to Appendix C in the 4 latest ZPE Cloud Manual at: https://www.zpesystems.com/user-manuals/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>