ZPE-IO8-U01 8-Channel USB GPIO Module Installation Guide
- June 3, 2024
- ZPE
Table of Contents
ZPE-IO8-U01 8-Channel USB GPIO Module
Product Specifications
HARDWARE
Onboard DPDT Relays 4
-
Supply Power 12V via USB cable
-
Requirements 1A/ 120V AC / 2A/ 24V DC
Maximum Switching Current -
Cable Included. Detached. Thunderbolt to USB Type A. 3 Meters (10 feet)
DESCRIPTION
Automate control of your equipment and sensors with this easy-to-use 4-port relay module. Connect to Node grid USB port, and relay simple commands to devices . Control and read relay status with CLI, Web, SNMP or Restful APIs.
Let’s set up your 8-Channel GPIO Module
-
Connect the module to any available USB 2.0 or USB 3.0 port on Node grid Serial Consoles, Services Routers, or USB hubs connected to Node grid hardware.
-
Ensure minimum Node grid OS version meets sensor requirements. Upgrade Node grid OS to minimum version 5.4.1
-
For more information, visit the “Sensor Quick Install Guide” section at: https://www.zpesystems.com/user-manuals/
-
OPTIONAL: To configure data collection in ZPE Data Lake, refer to Appendix C in the latest ZPE Cloud Manual at: https://www.zpesystems.com/user-manuals/
We suggest placing this product here
*Rack cage may be a different model or size
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>