ZPE-BCON-U01 Signal Beacon with Alarm (USB) Installation Guide
- June 3, 2024
- ZPE
Table of Contents
ZPE-BCON-U01 Signal Beacon with Alarm (USB)
Product Specifications ZPE-BCON-U01
HARDWARE
- Visual Status Solid / Blinking
- Notifications Red, Green, Blue LED
- Audio Buzzer 80dBm @ 1 meter
- Protection IP65 from water & dust
- Supply Power
- Requirements 12V with USB
- Audio Alarm None
- Color Black base. Blue light.
- Cable Included. Detached. Thunderbolt to USB Type A. 3 meters (10 feet)
DESCRIPTION
When systems fall out-of-spec, ZPE’s Signal Beacon with Alarm pinpoints rack and device problems with visual and audible feedback. This ensures real-time response to problem areas. This beacon features a long-lasting lifetime with IP65 protection from water and dust. Control and read status with CLI, Web, SNMP or Restful APIs.
Let’s set up your Compact Particulate Sensor
-
Connect the sensor to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
-
Mount sensor by screwing it on a surface where wires can run through. You may also use mounting tape. Orientation must be as shown, parallel to the ground.
-
Ensure minimum Nodegrid OS version meets sensor requirements. Upgrade Nodegrid OS to minimum version 5.4.1
-
For more information, visit the “Sensor Quick Install Guide” section at: zpesystems.com/user-manuals/
-
OPTIONAL: To configure data collection in ZPE Data Lake, refer to Appendix C in the latest ZPE Cloud Manual at: zpesystems.com/user-manuals/