ZPE-DST-U01 Compact Particulate Sensor (USB) Installation Guide
- June 3, 2024
- ZPE
Table of Contents
ZPE-DST-U01 Compact Particulate Sensor (USB)
Product Specifications ZPE-DST-U01
HARDWARE
- Features Laser-based light scattering particle sensing. Fully calibr ated.
- Response Time <6 s
- Concentration Range 0 µg/m3 to 1,000 µg/m3
- EMC Heavy industrial level IEC61000
- Output PM2.5, PM10 (standard);
- PM1.0, PM2.5, PM4.0, PM10 (compact)
- Supply Power 12V via USB cable
- Requirements 80 mA max.
- Compliance RoHS & REACH Cable Included. Detached. Samtec SFSD-05-28-H-5.00-SR to USB Type A.
4 meters (13 feet)
DESCRIPTION
Set up this compact sensor and respond quickly to airborne contamination. This
Particulate Sensor features a high concentration
range, and it offers 10 years of continuous use so you can set it and
forget it. Monitor and respond to environmental particulates, and ensure
optimal air quality for your operations. Control and read status using CLI,
Web, SNMP or Restful APIs.
Let’s set up your Compact Particulate Sensor
-
Connect the sensor to any available USB 2.0 or USB 3.0 port on Nodegrid Serial Consoles, Services Routers, or USB hubs connected to Nodegrid hardware.
-
Mount sensor by screwing it on a surface where wires can run through. You may also use mounting tape. Orientation must be as shown, parallel to the ground.
-
Ensure minimum Nodegrid OS version meets sensor requirements. Upgrade Nodegrid OS to minimum version 5.4.1
-
For more information, visit the “Sensor Quick Install Guide” section at: zpesystems.com/user-manuals/
-
OPTIONAL: To configure data collection in ZPE Data Lake, refer to
Appendix C in the latest ZPE Cloud Manual at: zpesystems.com/user- manuals/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>