ZPE-THS-U01 ZPE Temperature and Humidity USB Sensor Installation Guide
- June 3, 2024
- ZPE
Table of Contents
ZPE-THS-U01 ZPE Temperature and Humidity USB Sensor
Product Specifications ZPE-THS-U01
HARDWARE
-
Cable Included. Detached.
- USB Mini B to USB Type A. 3 Meters (10 feet)
-
Channels Channel ID:
- 00 (Temperature) Channel ID 01 (Relative Humidity)
-
Temperature Probe operating range: -40°C to 70°C
- Accuracy: ±0.3°C (-20°C to 70°C), max ±0.4°C
- Resolution: 0.015°C (typical)
- Repeatability: 0.06°C (typical)
-
Relative Humidity
Operating range: 0 to 100% RH- Accuracy: (at 25°C)
- Typical: ±2% from 0 to 90% RH
- Max: ±2.5% from 0 to 90% RH, ±4.5% from 90 to 100% RH
- Resolution: 0.01% RH (typical)
- Repeatability: 0.1% RH
-
Connecting Wire 0.8—1.5 mm²
DESCRIPTION
Acquire environmental temperature and relative humidity readings. Easily
integrate the compact probe in space-constrained locations, and get precise
measurements from the factory-calibrated, linearized, and temperature-
compensated digital sensor chip. The built-in particle
filter protects the components against dust, soot, and other particle
contaminants. Control and read status using CLI, Web, SNMP, or Restful APIs.
Let’s install your ZPE Temperature & Humidity USB Sensor.
-
Connect the sensor to any available USB 2.0 or USB 3.0 port on Node grid Serial Consoles, Services Routers, or USB hubs connected to Node grid hardware.
-
Ensure minimum Nodegrid OS version meets sensor requirements. Upgrade Nodegrid OS to minimum version 5.4.1
-
For more information, visit the “Sensor Quick Install Guide” section at: https://www.zpesystems.com/user-manuals/
-
OPTIONAL: To configure data collection in ZPE Data Lake, refer to Appendix C in the latest ZPE Cloud Manual at: https://www.zpesystems.com/user-manuals/
We suggest placing this product here
*Rack cage may be a different model or size
All rights reserved.
September 8, 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>