ZPE-SMK-U01 Smoke Detector Installation Guide

June 3, 2024
ZPE

ZPE - logo

SMK-U01 Smoke Detector
Installation GuideZPE SMK U01 Smoke Detector

Quick Install Guide
Smoke Detector (USB)
ZPE-SMK-U01
COMPATIBLE WITH
ALL NODEGRID DEVICES
ZPESYSTEMS.COM

Product Specifications ZPE-SMK-U01

HARDWARE

Smoke Sensitivity| Complies with EN 54-7:2000+ A1:2002
Protection  Requirements| IP30 Ingress
Requirements| ZPE-IO8-U01 & ZPE-RL4-U01
SOLD SEPARATELY
Must be installed to the Nodegrid environment prior to setting up Smoke Detector
Supply Voltage| 12V with USB Adapter
Operating| -10º to 55° C (14º to 131º F)
Temperature & Humidity| 93±3% at 40° C (104º F)
Cables|  Relay & Power
Relay &PowerExtension: 4 meters (13 feet)
IO Extension Cable: 4 meters (13 feet)
USB Adapter: 1 meter (3.33

DESCRIPTION

Detects smoke in the local environment. Use in conjunction with ZPE 4-Channel Relay and 8-Channel GPIO Modules (USB-powered). Sends notification when the detector  is triggered and remotely powers off. Control and read status with CLI, WebUI, SNMP, or Restful APIs.

We suggest placing this product here
*Rack cage may be a different model or size.

FOR MOUNTING
a. Detach base from unit.
b. Mount base with screws, top down and parallel to the ground.
ASSEMBLED IN THE USA
ZPESYSTEMS.COM +1.844.4ZPESYS
All rights reserved. September 8, 2022
c. Reattach top cover.

Let’s set up your Smoke Detector

  1. Make sure that the GPIO and Relay Modules are on hand and set up properly to a Nodegrid device before connecting the pieces as shown. Refer to the GPIO and Relay Module Quick Install Guides for details.ZPE SMK U01 Smoke Detector - Channel

  2. Once everything is connected, mount to rack then plug the USB Adapter to ANY available live USB port to supply power to the Smoke Detector.
    Mounting instructions in back.ZPE SMK U01 Smoke Detector -
Channel1

  3. Ensure minimum Nodegrid OS version meets sensor requirements. Upgrade Nodegrid OS to minimum version 5.4.1

  4. For more information, visit the “Sensor Quick Install Guide” section at: zpesystems.com/user-manuals/

  5. OPTIONAL: To configure data collection in ZPE Data Lake, refer to Appendix C in the latest ZPE Cloud Manual at: zpesystems.com/user-manuals/
    ZPE - logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals