FORD SuperDuty Trucks Installation Guide
- June 7, 2024
- Ford
Table of Contents
- FORD SuperDuty Trucks Installation Guide
- Installation Instructions FORD SUPERDUTY F-SERIES TRUCKS
- Hitch Shown In Proper Position
- Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating or
- Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FORD SuperDuty Trucks Installation Guide
Installation Instructions FORD SUPERDUTY F-SERIES TRUCKS
Hitch Shown In Proper Position
Equipment Required:
Fastener Kit: 41931F
Wrenches: 3/4”, 7/8”
Drill Bits: NONE
Do Not Exceed Lower of Towing Vehicle Manufacturer’s Rating or
| Hitch type | Max Gross Trailer WT (LB) | Max Tongue WT (LB) |
|---|---|---|
| Weight Distributing | 15,000 (6810 Kg) | 1500 (681 Kg) |
| Weight Carrying Ball Mount | 12,000 (5448 Kg) | 1200 (545 Kg) |
Wiring Access Location: PU1, PU2
- Lower spare tire to allow for access to existing slots in vehicle frame rails.
- Remove existing electrical bracket from vehicle if present and relocate as required.
- Raise hitch into position and install fasteners as shown above.
- Raise and position spare tire to allow for clearance between the receiver tube and the hex bolts coming through the frame rails.
Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Note: check hitch frequently, making sure all fasteners and ball are
properly tightened. If hitch is removed, plug all holes in trunk pan or other
body panels to prevent entry of water and exhaust fumes. A hitch or ball which
has been damaged should be removed and replaced. Observe safety precautions
when working beneath a vehicle and wear eye protection. Do not cut access or
attachment holes with a torch. This product complies with safety
specifications and requirements for connecting devices and towing systems of
the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>