EMEET Smart Conference Speaker User Manual
- June 7, 2024
- eMeet
Table of Contents
Smart Conference Speaker
User Manual
Packaging contents
Product description
The eMeet OfficeCore series smart wireless speakerphone allows sending and receiving audio during talk time. Connection of OfficeCore products to PC, phone or tablet PC via Bluetooth, USB or AUX (analog audio) is available. The OfficeCore series products include a small portable omnidirectional microphone speaker with a high-quality connection for far-field, 360-degree sound recognition, and pick-up.
Function display
- Smart button
- input source switch button
- Answer/end button
- volume down
- Volume up
- Mute button
- Status light
- On/off
Lock- AUX audio input port
- Earphone audio output port
- Micro USB port
- Microphone
How to use
1.on/off
Long press On/Off for 2 seconds to turn on
2. Three operating modes. C-
The first mode: connect the computer to eMeet OfficeCore product with a USB
cable
The second mode: connect eMeet OfficeCore product via Bluetooth
Press the Input source switch button for two seconds. The status light is blue
when pairing
2. Turn on Bluetooth on mobile phone or PC and select eMeet OfficeCore product from the list of devices. The third mode: connect eMeet OfficeCore product with AUX analog audio wire
When multiple sound sources are input simultaneously, select the required
source by pressing the””button.
The blue light shows sgtch to Bluetooth status; The white light shows switch
to AUX, status; The green light shows switch to USB status.
3. Answer /end the call
When there is an incoming call,press” ” button to answer the call.
In the talk mode, press button to the end call.
4. Call sound assistant
Short press ” ” button to call Sound Assistants on the phone such as Sid, Google Now, Tencent jingle or eMeet. Sound control enables calling, texting, and weather checking.
5. Control volume
Press the volume +, volume – to increase or decrease the volume.
6. Charge eMeet OfficeCore product
Via the computer
Through the adapter.
Warning
Use UL certified ITE power supply only, the rated output is 5Vdc, minimum 1A.
Using other power sources invalidates the approvals for this device and
triggers potential danger.
7. Check the battery
Short press NJ to check the current residual ca pacity of eMeet OfficeCore product. The percentage of the green light represents the current residual capacity of the device as shown in the 4 schematics (25%, 50%, 75%, 100%) When the battery is low, the ring light will be red with a low battery beep (once every 5 minutes) till the power is exhausted and the device automatically shuts down.
8. External speaker \ headset
External speaker: connect the speaker to the AUX OUT port of eMeet OfficeCore product with an audio wire. The sound will be played through the speaker to volume up.
External headset: connect the headset to the AUX OUT port of eMeet OfficeCore The sound will be played through the headset.
9.Bluetooth wireless adaptation
Plug Bluetooth wireless adapter into computer, turn on eMeet OfficeCore product and enter pairing. The Bluetooth wireless adapter will be automatically connected to eMeet OfficeCore product.
For more information, please visit www.emeet.ai/support
Notes:
Do not place the battery in direct sunlight fire exposure places.
Note : If the battery or battery pack is improperly replaced, there will be explosion hazard. Only technical engineers of our company or our authorized service points can replace with battery of the same or equivalent type.
The whole device and accessories should be placed in dry ventilated indoor places to avoid rain, water drop, water ingress, fall, and coverage of vent holes.
To protect the environment, put the discarded products into the designated sorting trash bin and do not discard directly.
Only applicable to areas of an altitude below 2000m
Only applicable to non-tropical climate
The Bluetooth® words and trademarks are reserved by Bluetooth SIG, Inc.
| Speaker output rating | 3W RMS |
|---|---|
| Frequency response | 20HZ-20KHZ(A 1dB) |
| SNR | >80dB |
| Bluetooth version | V4.2 |
| Bluetooth distance | 20M |
| Microphone sensitivity | 26dB |
| Microphone frequency response | 100Hz-8KHz |
| Microphone directivity | 360-degree omnidirectional |
| Battery specification | 3.7V/2500mAh |
| Charge time | 3-4hours |
| Usage time | Talk time: 12 hours(Depending on the usage, the talk time varies) |
| Charge specification | 5V/1A |
| Size | 125x125x35mm |
| Weight | 300g |
FAQ:
| Problem or phenomenon | Possible Causes | Method |
|---|---|---|
| Startup failure | Low or no battery | Access the adapter to charge |
| Automatic shutdown soon after starting up | Low battery | Access the adapter to |
charge
No sound| Check the correct connection; select correct audio input; turn on
the volume| Select the correct audio input; adjust the device volume
USB failure| Error with using USB wire| Please use the original USB wire
AUX failure| Error with using AUX wire| Please use the original AUX wire
Device charge failure| Faulty charging device or full battery| Replace with a
functional device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>