logitech Pro X Wireless LightSpeed Gaming Headset User Guide
- June 7, 2024
- Logitech
Table of Contents
logitech Pro X Wireless LightSpeed Gaming Headset
A Quick Look
FEATURES
- Microphone mute toggle
- Volume wheel
- Power switch
- USB C charging port
- Microphone
HEADSET SETUP
- Connect microphone to headset
- Plug receiver into USB port
- Turn on power switch
- Download and install optional software.
HEADSET OPERATION
Microphone mute toggle
Microphone is active when red is not visible. Microphone is muted when red is
visible.
Volume wheel
Rotate up to increase OS volume.
Rotate down to decrease OS volume.
Power switch
Power is on when cyan is visible. Power is off when red is visible. Headset
will power down automatically after 30 minutes of no audio to save battery
life. To resume use, turn the power off, then back on again. Timeout value can
be adjusted in G HUB.
USB C charging port
Use provided USB A to USB C charging cable to charge headset by plugging into
USB port on PC. Cable is for charging and firmware update only – audio will
not play over wired connection.
Microphone
For optimal voice pickup, place foam ball approximately two fingers’ width
from the corner of your mouth. Blue VO!CE functionality can be enabled using G
HUB software.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>