infineon TRAVEO T2G Accelerating Zone Controllers Instruction Manual
- June 4, 2024
- infineon
Table of Contents
infineon TRAVEO T2G Accelerating Zone Controllers Instruction Manual
TRAVEO™ T2G: TVII-B-E-1M registers
Body controller entry technical reference manual
About this document
Scope and purpose
The TRAVEO™ T2G body controller entry registers TRM provides reference
information for registers and contains respective programming details.
Intended audience
This manual is for system designer and programmers who are designing or
programming using TVII-B-E-1M parts.
TRAVEO™ T2G: TVII-B-E-1M registers
Body controller entry technical reference manual Instructions
Instructions
This document contains instructions for the location of
- TVIIBE1M_RegistersTRM.html
- TVIIBE1M_RegistersTRM_Diff_Rev0F_Rev0G.pdf and
- TVIIBE1M_RegistersTRM.pdf files.
The above mentioned files are located in the 002-19567 source folder. To use TVIIBE2M_RegistersTRM.html file, unzip the 002-19567.zip file and open the .html file in the web browser.
TRAVEO™ T2G: TVII-B-E-1M registers
Body controller entry technical reference manual
Revision history
Revision history
| Document version | Date of release | Description of changes |
|---|---|---|
| ** | 2017-07-06 | Specification for new silicon. |
| *A | 2018-07-25 | Removed those registers which does belong to the product based on the parametrization. |
Removal of bit fields which does belong to the product based on the parametrization.
Removal of the registers which are “Hidden”.
B| 2018-09-12| Addition of CXPI registers.
C| 2019-05-16| Instance table is created for each IP and the Instance number is picked from the parameter section of the XML.
Links are created for the REGISTER table with offset from the base. All registers are displayed (same instance of the same IP).
All bit-fields per register are rendered based on parameterization Logs captures the following three details:
a. IP and its respective instances
b. IP wise Hidden registers
c. IP wise Populated registers Optimization of HTML:
a. Stable “File Header” which was earlier moving along with the contents
b. Color codes for the navigation pane
c. Links to the REGISTER definition from the register table.
*D| 2019-09-17| 1. All the instances of all the IPs are supported now.
2. Look and feel of the UI has been changed to make it more user friendly:
a. Distributed into 3 panes:
i. Sections
ii. Registers
iii. Content
b. Default page with right fragment opens up with the references, notes, and registers structure with respective links on the Contents pane.
c. Registers pane provide global search operation after feeding first 3 characters when ONLY at home.
d. On the Sections pane, user must select the MMIO > IP > Instance etc.
e. Registers pane provides Search options for the selected instance.
f. Once a particular instance is chosen, the Registers pane provides a list of registers. User can select one of these registers and observe the register structure on the Contents pane.
3. Instance table, register name and offsets have been removed, as they are no longer needed.
4. All hidden registers and sections are not visible (similar to earlier versions).
5. There is no PDF associated with HTML as earlier. Known Issues:
1. There is no way to print any content as of now.
2. There could be a slight misalignment on the content pane based on the screen
size.
TRAVEO™ T2G: TVII-B-E-1M registers
Body controller entry technical reference manual
Revision history
| Document version | Date of release | Description of changes |
|---|---|---|
| *E | 2020-03-04 | 1. Extensive search options using address or register or bit fields. |
Search option is supported for “Registers”, register “Addresses” and register “Bit Fields” using prefixes “reg:” or “add:” or “bit:” respectively.
2. Buttons “Home”, and “Up” included.
3. Register Structure with links, all homepage notes are moved down.
4. Some fixes which were present in the previous revision in spec system. Missing contents due to parser errors (CDT#343334).
5. Print options for the selected registers.
6. HTML is supported only on Chrome, Mozilla Firefox, Opera, UC Browser and Microsoft Edge browsers.
(No support for any other OS/Mobiles etc.)
7. Issue of content overlap while re-sizing after “restore down” option is fixed. Known Issues:
1. Whole HTML print option not available.
*F| 2020-08-07| 1. Based on Revd. of Silicon, no major changes.
2. Addition of many Arm Core system registers and description corrections of some registers.
3. Removed some Slash and effuse registers.
4. SW Access note enhanced.
5. Added HW access note for registers behavior.
*G| 2021-09-29| 1. Changes in line with PCN#213702
2. Refer to Registers TRM difference log with respect to previous revision for details
3. Addition of PASS/ADC registers for Temperature sensor control and trimming
4. Slash TOC2 updates for flash boot
5. Minor description updates to some registers
6. Addition of effuse CUSTOMER_DATA registers
7. Addition of marker for security enhancement
Trademarks
All referenced product or service names and trademarks are the property of
their respective owners.
Edition 2021-09-29 Published by Infineon Technologies AG 81726 Munich, Germany © 2021 Infineon Technologies AG. All Rights Reserved. Do you have a question about any aspect of this document? Go to www.cypress.com/support Document reference 002-19567 Rev. *G
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a
guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With
respect to any examples, hints or any typical values stated herein and/or any
information regarding the application of the product, Infineon Technologies
hereby disclaims any and all warranties and liabilities of any kind, including
without limitation warranties of non-infringement of intellectual property
rights of any third party. In addition, any information given in this document
is subject to customer’s compliance with its obligations stated in this
document and any applicable legal requirements, norms and standards concerning
customer’s products and any use of the product of Infineon Technologies in
customer’s applications. The data contained in this document is exclusively
intended for technically trained staff. It is the responsibility of customer’s
technical departments to evaluate the suitability of the product for the
intended application and the completeness of the product information given in
this document with respect to such application. For further information on
technology, delivery terms and conditions and prices, please contact the
nearest Infineon Technologies Office
(www.infineon.com). WARNINGS Due to technical
requirements products may contain dangerous substances. For information on the
types in question please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written
document signed by authorized representatives of Infineon Technologies,
Infineon Technologies’ products may not be used in any applications where a
failure of the product or any consequences of the use thereof can reasonably
be expected to result in personal injury.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>