logitech G923 Trueforce Racing Wheel User Guide
- October 27, 2023
- Logitech
Table of Contents
G923
Racing Wheel and Pedals For Xbox One and PC
SETUP GUIDE
GUIDE D’INSTALLATION
G923 Trueforce Racing Wheel
logitechG.com/support/9923-xbl 
CONNECTIONS AND MOUNT POINTS
- Mounting clamps
- Cable management cleat
- Optional shifter connection (DB-9 male)
- USB cable
- Pedal unit connection (DB-9 female)
- Power connection
- Bolt mounting points (uses M6X1 bolts)
OPTIMAL CABLE ROUTING
USB and pedal cables (1, 2) should be routed through inner channels
Power and optional shifter cables (3, 4) should be routed through outer
channels
Cables may be wrapped multiple times around cable management cleat to take in
slack
INSTALLATION — XBOX ONE — PC
Attach power adapter and USB cables as shown
Every time your racing wheel connects with your system, it will rotate fully
to each side and then to the center to calibrate
Your wheel will be ready once this calibration is completed For PC to enable
the force feedback and RPM LED features on your G923 Wheel and Pedals you must
install the Logitech G HUB software This can be found at
logitechg.com/support/g923-xb1
MOUNTING CLAMPS
G923 Racing Wheel is equipped with a built in clamping system for mounting to
a table
Push down and rotate clamp knobs to lock or unlock Rotate clamp knobs to
tighten or loosen clamps
Note: Clamp extenders should be removed for attachment to thicker tables
BUTTONS
1 Left bumper
2 Directional pad
3 View button
4 Left stick button
5 +/- Setting Adjustment buttons
6 Right bumper| 7 A, B, X, Y buttons
8 Menu button
9 Right stick button
10 Setting Selection Dial and select button
11 Xbox button
---|---
- requires supported games on Xbox One Assignable in any game on PC using either in-game assignment or Logitech G HUB software
FORCE FEEDBACK
Your Racing Wheel contains dual motors that will provide force feedback with
supported games and systems
In supported titles you will also experience our next generation approach to
force feedback: TRUEFORCE
TRUEFORCE integrates directly with game physics and audio to unlock high-
definition, real-time force feedback Tire grip, suspension, weight,
horsepower—even unique engine sound resonance—are immediately and accurately
felt through the wheel
Supported titles on Xbox One and PC may implement TRUEFORCE high-definition
force feedback For a list of supported titles visit logitechg
com/support/g923-xb1
Note: Your Racing Wheel has an overheat protection circuit safeguard to
protect it under high-temperature operating conditions
In rare instances, force feedback features may shut down during use while
controls continue to operate
If this occurs, allow the wheel to cool down and power it down by unplugging
it If this occurs frequently, contact product support
FEATURES
-
Clutch pedal
-
Brake pedal
-
Throttle pedal
-
Textured heel rest
-
Bolt mounting points (uses M6X1 bolts)
-
Patented carpet grip system
-
Carpet grip release clip
Push towards rear of pedal unit to release -
Change pedal face position (requires 2 5mm hex key)
USING THE DUAL CLUTCH IN-GAME
Using a dual clutch system from a grid start in a race enables you to achieve
maximum traction without the need to find the bite point of your clutch pedal
– this can give you a significant advantage at the start of a race
To use the dual clutch system in-game:
- At race start, fully depress the clutch pedal and the button assigned to the dual clutch function (see next section for setting instructions)
- Select first gear using the Gear Up Paddle and fully depress the gas pedal
- As soon as you get the green light for race start, immediatelyrelease the Dual Clutch button The car should start moving as the bite point of the clutch is engaged
- Smoothly release your foot from the clutch pedal in order to
achieve maximum traction It’s worth practicing this last stepand modifying the bite point setting several times to find a method that works for you Once you have it perfected, this feature can help make up several places on the grid
Note: Support for the dual clutch function is not possible in some games A list of games that support the dual clutch feature can be found at logitechg com/support/g923-xb1
SETTING UP THE DUAL CLUTCH SYSTEM
- Press and hold the left and right gear paddle and Left stick button and Right stick button together for two seconds to enter dual clutch setting mode The RPM LEDs will illuminate blue and flash slowly: Note: Whilst in the Dual Clutch setting mode the RPM LEDs will not respond to the game/SDK
- Press the button you want to set as the dual clutch button The only valid buttons for this are the left stick button (LSB) and right stick button (RSB) The RPM LEDs will flash red to show that you’re in clutch position setting mode
- While in your chosen simulation or game with the car still on a track, fully depress the clutch and gas pedals Engage first gear and keep pressing the minus button down until the car begins to move in-game You can adjust the precise bite point of the clutch by using the plus and minus buttons until you are happy with the setting
- At this point you may test the dual clutch without leaving the setting mode It is recommended you attempt a race start, stop the car and adjust the bite point and then try again until you are satisfied with the performance of the dual clutch
- Press the Select button in the middle of the dial on the wheel to exit dual clutch setting mode The RPM LEDs will flash in a sequence from green to blue to show that the setting is saved The RPM LEDs will then go out and begin responding again to RPM output from supported games
RESETTING DUAL CLUTCH SYSTEM
Press and hold the left gear shift, right gear shift, and X button for two
seconds
The RPM LEDs will all flash four times and then extinguish to indicate that
the Dual Clutch system has been reset
The button assigned to the Dual Clutch system (LSB or RSB) will revert to its
normal function
USING LOGITECH G HUB
Logitech G HUB enables the following features on the G923:
- Button programming with profiles that can be linked to games
- Adjustment of wheel settings, such as Rotation Angle and TRUEFORCE strength
- Testing of the various buttons, wheel and pedal functions
G HUB WHEEL SETTINGS
Sensitivity
Alters the output response of the wheel to be more or less sensitive Leaving
this slider at 50% will provide a linear 1:1 output Between 51% and 100% will
make the wheel increasingly more sensitive around the centre movement of the
wheel Between 0% and 49% will make the wheel decreasingly sensitive around the
centre movement of the Wheel
Operating Range
The G923 is capable of up to 900 degrees of rotation Reducing this setting
will change the point at which the wheel will reach full steering lock This is
especially useful if you’re driving a car with a smaller actual steering lock
angle, such as a Formula 1 or GT3 car
Centering Spring (for games without force feedback) Most games that support
force feedback already model the correct return to center function of the G923
based on the virtual car It is recommended that the Centering Spring option be
turned off for these games
Enabling the Centering Spring option will allow you to override the game
features and adjust the strength of the return to center force using the
provided slider
Torque
Only available for TRUEFORCE supported games Torque controls the overall force
feedback strength for your G923
Audio Effects Only available for TRUEFORCE supported games Controls the
overall strength of the audio-related effects (engine note, rumble strips etc
) when using TrueForcecompatible titles If you are using your G923 in older
titles that do not support TRUEFORCE then adjustment of the force feedback can
be performed from the settings menus of the game title
G HUB PEDALS SETTINGS
Sensitivity
Alters the output response of the pedals to be more or less sensitive Leaving
this slider at 50% will provide a linear 1:1 output Between 51% and 100% will
make the pedal
increasingly more sensitive around the initial movement of the pedal Between
0% and 49% will make the pedal decreasingly sensitive around the initial
movement of the Pedal
Combined Pedals
If checked, this will set the gas and brake pedals to become two halves of a
single axis This will help the pedals operate correctly in older racing titles
that do not support separate axefor pedals
Note: if left checked then the pedals will not behave correctly in modern
racing titles If you find that just one of your pedals is functioning by
accelerating when pressed and braking when released then you should make sure
that this option is not checked
TESTING YOUR WHEEL AND PEDALS
On the wheel and pedals screens in G HUB you can check every button and axis
on your G923 in order to ensure everything is functioning correctly For the
wheel you can also see the effect of altering the Operating range
QUESTIONS?
logitechG com/support/g923-xb1
© 2019 Logitech Logitech, Logitech G and the Logitech and Logitech G logos are
trademarks or registered trademarks of Logitech Europe S A and/or its
affiliates in the U S and other countries All other trademarks are the
property of their respective owners Logitech assumes no responsibility for any
errors that may appear in this manual
Information contained herein is subject to change without notice Playseat
TAKE A SEAT AND DRIVE LIKE A CHAMPION
F1 RACING
BECOME YOUR OWN
F1 HERO AT HOME 
VISIT PLAYSEAT.COM
CHALLENGE
FOLDABLE FOR
EASY STORAGE
VISIT PLAYSEAT.COM
SENSATION
SUPERIOR BUILD QUALITY, STABILITY AND COMFORT
visit playseat.com
11@ PLAYSEATGLOBAL
THE COLOR COLLECTION
Welcome to a fresh new toke on gaming gear.
Logitech G performance and quality meet fun, vibrant color. Ploystyle matters.
Choose yours. 
Warning! Pedals have pinch points that may cause personal injury.
Keep fingers, bare toes, and children away from pedals.
Warning! Wheel will automatically ~ adjust during setup, when adding
power which may cause personal injury.
During adjustment, keep hands, fingers, and children away from wheel.
Important Safety, Compliance and Warranty lnforrnation
Read Manual Before Product Use.
POWER SUPPLY WARNING! The power supply is for indoor use only.
Only use the power supply included with your product. Do not attempt to repair
or use a damaged power supply. Do not immerse the power supply in water or
subject it to physical abuse. Inspect the power supply regularly for cable,
plug, and casing damage.
BATTERY WARNING ! : Improperly replaced batteries may present a risk of
leak or explosion and personal injury. Mistreated rechargeable batteries may
present a risk of fire or chemical burn. Do not disassemble or expose to
conducting materials, moisture, liquid, or heat above 54°( (130°F). Do not use
or charge the battery if it appears to be leaking, discolored, deformed, or in
any way abnormal. Do not leave your battery discharged or unused for extended
periods Do not short circuit. Your device may contain an internal,
rechargeable battery that is not replaceable. Battery life varies with usage.
Non-operational batteries should be discarded according to local laws. If no
laws or regulations govern, dispose of your device in a waste bin for
electronics. Keep batteries away from children.
sate Usage Guidelines for Products
– Do not open or modify the product except for battery removal and
replacement.
– Do not disassemble or attempt to service this product.
– This product is safe under normal and reasonably foreseeable operating
conditions.
– If product is operating improperly, call Logitech support.
– Product must be returned to the manufacturer for any service or repair.
– This 1s not a Children’s Product and is not intended for use by children
under 14 years old.
– Long periods of repetitive motion using the product may be associated with
nerve, tendon or muscle injury in Y<>t.fr hands, wrists, arms. shoulders, neck
or back. See a qualified health professional for pain, numbness, weakne•ss.
swelling, burning, cramping, or stiffness.
Please read guidelines at http://www.logitech.com/comfort.
– Use caution when operating moving parts.
– WARNING! The product contains small. detachable parts, which may cause
choking, personal injury, or death, especially in children. Please exercise
care in the use and handling of small parts, and keep them away from children
under 4 years of age.
– For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
Use Guidelines: sate & Proper Use of Your Product:
– Use the product with list1=d/certified ITE computers and accessories.
– Connect power supply or power cord to a properly wired and grounded
electrical outlet.
– Disconnect the power source pnor to defeating or bypassing the equipment
safeguard. RE?store the equipment safeguard before restoring power.
Warning. Risk of fire or explosion if the battery is replaced by an
incorrect type. Ensure batteries are installed correctly by following the
instructions provided. A battery subJected to extremely low air pressure may
result in an explosion or the leakage of flammable liquid or gas.
**caution Connect all power cords to a property wired and grounded
electrical outlet.
Moving parts.** This product is not intended for use by children. Unplug
this product when not in use for extend!)(! periods of time. Store product
awa>J from children when not in use for extended periods of time.
Logitech Compliance. For Product Safety, EMC, RF and Energy information, go
to www.logitech.com/compliance.
Maintenance is not required for product compliance.
This product complies with relevant legal requirements for Restriction of
Hazardous Substances (RoHS) and management of waste electronic and electrical
equipment (WEEE) in the EU, Turkey, Ukraine, United A@b Emirates, India, China
and Taiwan. For RoHS and WEEE information, go to
www.logitech.com/compliance. lt -0
Batteries, electronic and electrical eQuipment should not be disposed of with
household waste. Wherever possible, they should be segregated and brought to
an appropriate collection point to enable recycling and avoid potential
impacts on the environment and human health. For more information, contact
your local authorities or place of purchase, or visit
www.logitech.com/recycling.
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy. And, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If thlS eQuipment does cause harmful
interference to radio or television reception, which can be determined by
turning the eQuipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warning: Where shielded interface cables or accessories have been provided
with the product or specified additional components or accessories elsewhere
defined to be used with the installation of the product, they must be used in
order to ensure compliance with FCC. Changes or modifications to product not
expressly approved by Logitech, Inc could void your right to use or operate
your product by the FCC.
IC statement : CAN ICES-3 (B) / NMB-3 (B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
Radiation Exposure Statement
This wireless product complies with the FCC and Industry Canada RF exposure
limit for portable devices.
Logitech Limited Hardware Product Warranty- A Summary Logitech warrants that
its hardware product shall be free from defects in materials and workmanship
for the length of time identified on your product package beginning from the
date of the original retail purchase. See support.logitech.com for specific
warranty information about your product and procedures to act on a warranty
claim. Logitech’s entire liability and your exclusive remedy for any breach of
warranty shall be, at Logitech’s option, to repair or replace a functional
eQu1valent of the product, or to refund the price paid, if the hardware is
returned to the point of purchase or such other place as Logitech may
direct along with a receipt. Warranty protections are in addition to rights
provided under local consumer laws and may vary among countries. See full
warranty information to know your consumer rights and the additional
protections provided by this product warranty. Logitech Address: Log1tech,
Inc., 7700 Gateway Blvd. Newark, California
94560. Full Warranty Information: support.logitech.com
Visit IogitechG.com and follow @logitechG to find out
more.
Visita logitechG.com y sigue a @logitechG para
averiguar mos.
References
- Logitech Support + Download
- Playseat® - Game Seats and Racing & Flying Simulation Cockpits
- Logitech Support + Download
- Compliance Certification Search | Logitech
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>