GORFACTORY LKBTS373 Bamboo Solar Bluetooth Speaker User Manual

GORFACTORY LKBTS373 Bamboo Solar Bluetooth Speaker

Overview

1. Solar Panel
2. Type C input port
3. Light Indicator
4. Switch button ON/OFF

Specifications

• Wireless Version: V5.1
• Power Output: 3 W
• Power Supply: D C5V-1/2A
• Battery capacity: 3 00mAh
• Input solar: approx. 100mAh/ hour
• Transmission Range: <10m
• Input Sensitivity: >=8 0 dB
• Charging time: via cable about 3-4h; via sunlight about 6-8 h Playing time: approx. 3h

Charging the speaker

1. Connect the provided Type C charging cable to the speaker Type C port;
2. Insert the other end to the USB port into a suitable power source (recommended wall charger with at least 5W output power)
3. During the charging process, the red LED light will be visible; the LED light will switch off when the charging process is finished
4. Or alternatively, put the speaker under the sunlight to be charged via a solar panel. Green LED light is visible during the solar charging process.

Connection to Wireless device

• Fol low the operating i nstructions of your W wireless device for pairing with the speaker.
• Normally this is done by going to the ” Wireless”, ” Set Up” or “Connect” menu and selecting the option to search for Wireless devices.
• Press the speaker button to power it on.
• When pairing, look for ” LK- BTS- 373″ on your Wireless device and select this for pairing.
• When pairing is successful, you can hear some voice indicators.
• When the speaker is used again – a second time or the next time – newer devices should reconnect automatically. lf the connection fails, please follow the above steps in these instructions.

Playing music

1. Press the speaker button to “Power on/ off / Play music/ Pause music”.
2. You can also use your device to select “Previous track/ Volume Down” or/ and “Next track/ Volume Up”.

Safety instructions

• Do not drop or bump this product.
• Do not disassemble, do not repair the speaker yourself.
• Please use the power charger with rated voltage for the speaker.
• Please disconnect the USB-C cable after charging finish.
• Charge the speaker battery at least once in 3 months’ time to maintain proper battery life.
• Do not dispose of the device with household waste. For disposal, it should be transferred to a specialized disposal company

FCC STATEMENT

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FAQ

• Q: How long does it take to fully charge the speaker via solar power?
• A : It takes approximately 6-8 hours of direct sunlight to fully charge the speaker using solar power.
• Q : What is the wireless version of the speaker?
• A: The wireless version of the speaker is V5.1, providing reliable connectivity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>