Lorelli MARTINA Stroller Instruction Manual

June 12, 2024
lorelli

Lorelli MARTINA Stroller Instruction Manual
Lorelli MARTINA Stroller

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.

SAFETY REQUIREMENT

  1. This vehicle is suitable for children from 6 month and weight up to 15 kg!
  2. The height of the carried child in the stroller should not exceed 96 cm!
  3. Use parking device if you do not hold the stroller with hand!
  4. Do not leave the stroller on hills or inclined surfaces even if you have activated the parking system!
  5. Parking device shall be engaged when placing and removing the children!
  6. The shopping basket can take a maximum load of 2 kg!
  7. Any load attached to the handle and/or on the back of the backrest and/or on the sides of the vehicle will affect the stability of the vehicle! Maximum load of the accessory bag 1 kg. Do not hand any additional bags !
  8. Regularly check for loose parts! Make routine inspection, regularly maintain, clean and/or wash the vehicle!
  9. The vehicle shall be used only for 1 child!
  10. Accessories which are not approved by the manufacturer shall not be used!
  11. Only spare parts delivered or recommended by the manufacturer/ distributor can be used!
  12. Always use the restraint system! Always use the crotch belt in combination with the waist belt! To prevent injury from a fall or a slip off always use the shoulder straps!
  13. Make sure that the safety belts are placed properly!
  14. The stroller should always be used under the supervision of an adult!
  15. Do not allow children to suspend him/herself or play in the stroller!
  16. Do not allow children to stand in the stroller!
  17. Do not allow your child to stand on the seat and foot rest!
  18. Do not use the stroller on uneven surfaces near fire or other dangerous places!
  19. Do not use the stroller on stairs and escalators!
  20. Fold the stroller before go upstairs and downstairs. Mounting the stroller on stairs, pavements and others with the child in itand by pushing the handle causes deformation of the stroller and is out warranty repair!
  21. Adjusting of the back rest must be made only by a person read carefully the instruction rules for adjusting!
  22. Any additional baggage left in the stroller may cause it to become unstable!
  23. The person who assembles the stroller must be familiarized with its functions!
  24. WARNING! No additional mattress / cushion shall be added.
  25. The frontbar can not be used as a carry handle.
  26. This stroller is suitable for children up to 3 years old!

WARNING

WARNING! Never leave the child unattended! i
WARNING! Ensure that all the locking devices are engaged before use!
WARNING! To avoid injury ensure that the child is kept away when unfolding and folding this product!
WARNING! This seat unit s not suitable for children under 6 months!
WARNING! Do not let the child play with this product!
WARNING! Always use the restraint system!
WARNING! Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use!
WARNING! This product is not suitable for running or skating!
WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.

EN 1888 -1:2018+A1:2022

MAINTENANCE AND CARE

  1. To clean the metal parts, wipe with a moist and then dry towel until the stroller is all dry.
  2. To clean the plastic parts, use a towel, water and a soft deterg
  3. To clean the textile parts, use a solution for cleaning tapestries.
  4. When not in use, never place other objects in or on the stroller! This will damage it!
  5. Always dry and air the stroller if it is not dry enough!
  6. Run regular clean-ups over the wheel axes and the plastic elements.
  7. Always clean the wheel axes and plastic elements after using the pram over sandy or dusty surfaces!
  8. DO NOT LUBRICATE the wheel axes or other movable parts of the stroller! Just clean them!
  9. Run regular checks for loose or damaged parts and if there are such, immediately replace them with newones!

PARTS

Picture 1
Parts

  1. Metal frame of the stroller: 1 pcs
  2. Rear wheels: 2pcs
  3. Shopping basket: 1pcs.
  4. Front wheels: 2pcs
  5. Basket: 1 pcs
  6. Fingerboard: -1pcs
  7. Foot cover: -1 pes
  8. Canopy: -1 pcs

UNFOLDING

  1. Folded stroller (Photo 2) Release the blocking mechanism. (Photo 2.1)
  2. Lift the handle of the stroller up and then push forward. As a result, it will extend and lock automatically. (Photos 3 and 4)
    Unfolding

ASSEMBLING

  1. Place the rear axle in the frame tubes until it clicks (Picture 5) To disassemble the rear axis, press the thumbs in the bracket openings under the rear axle and pull out. Picture 6Assembly Instruction

  2. Place the rear wheels as you follow the sequence of the elements on photo 7 1. Metal washer; 2. Rear wheel; 3. Cipclip ; 4. Cap of the cirdip. Make sure that the cirdip 3 is fastened to the rear axle, then fit the cap 4 on it and make sure it is attached to the cirdip. Check that the wheel is fixed by pulling it slightly outwards.
    Assembly Instruction

  3. Insert the protective cover on the wheel Picture 8. To disassemble the rear wheels, press the clips of the protective cover behind the wheel to remove it (Picture 8) and with a straight screwdriver, remove the rear axle elements shown in picture 7
    Assembly Instruction

  4. Install the front wheels by pressing them upwards until they are locked. (Picture 9) Check if they are locked well. To unmount them, press the console button and pull the wheel down. ( Picture 10 )
    Assembly Instruction

  5. Mount the fingerboard for the child. (Photo 11;12) To remove the fingerboard, open the dips placed on both its sides and pull all the way. (Photo 13)
    Assembly Instruction

EXPLOITATION

  1. To lay down the footrest push the red buttons on its both sides. (picture 14). To lift the footrest up just push it up with your one hand. (picture 15)
  2. To place the stroller in a stationary position, use the rear wheel brakes, by pressing the brake pedal located on the rear axle. (Photo 16) To release the brake, lift your leg from the brake pedal. (Photo 17) WARNING: The parkin. device does not guarantee an optimal hold in steep slopes. Therefore never leave the stroller on a sloping ground with a child sitting or lying in the stroller!
  3.  To overcome obstacles, turn the stroller handle into the child’s forward facing position (above the rear axle). To raise the front axle of the stroller to overcome the obstacle, press the rear axle (Picture 18) with the foot, not the brake, and then pull the handle back against you. Caution: Do not push the handle straight down! First pull the handle toward you
  4. While moving the stroller along rough and uneven surfaces you can use the option of movement in a straight line by lifting the blocking cog on the front wheels. (Photo 19.1) To release the front wheels, press down the locking cog. (Photo 19.2)
  5. For a change (lowering) the sunshade position, take its upper part and pull down to the desired position. (Photo 20)
  6. Adjusting the backrest – To raise the backrest, squeeze the buckle button behind the backrest and pull out the belt. Picture 21 To release the backrest, squeeze the buckle button and release the backrest down. Picture 22
  7. While using the summer seat BY ALL MEANS fasten the safety belts on the child!
  8. Put the shoulder and waist belts together and place them in the central buckling clasp. (Photos 23;25) Regulate the length of the safety belts by pulling the clasps all the way. (Photo 24) To unlock the belts, press the button on the central clasp. (Photo 25)

FOLDING

  1. Remove the fingerboard on the front of the child like is described in point 5 ASSEMBLING. Picture 13
  2. WARNING! Press down the locking cog of front wheels. (Photo 19.2)
  3. Activate the stroller brakes.
  4. Fold the sunshade to the maximum.
  5. Place the stroller backrest in the lower (lying) position. Picture 26.1
  6. Folding the stroller for transportation is done by pulling the mechanisms located on both sides of the handle and pressing down. Picture 26-2;3
  7. After folding, place the fixating mechanism against self-unfolding. (Photo 27 ) 8. The correctly folded stroller should look like the image in photo 28.

COSTUMER SUPPORT

Unic importator in Romania
DIDIS INTERNATIONAL
Strada Sfantul Pantelimon Nr.1
Oras Pantelimon, Judetul Ilfov
Phone: +40 21 211 65 60
Fax: +40 21 210 65 62
E-mail: office@didis.ro

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals