make it real 1322 Celestial Stones Bracelets Instructions
- June 9, 2024
- make it real
Table of Contents
make it real 1322 Celestial Stones Bracelets
INSTRUCTIONS
WHAT’S INSIDE
You will need
LEGEND
MOON BRACELET
- Measure and cut 30 cm (12 in) of elastic cord.
- Attach the cord to the working surface with a piece of adhesive tape.
- Thread the beads onto the cord following the sequence shown
- Make a double knot using the ends of the cord. Secure the knot by covering it with a drop of craft glue. Allow 5 minutes to dry, then cut off the excess lengths of cord after the knot.
- Repeat steps 1 to 4 to make the other beaded bracelets.
LIGHT PINK BRAIDED BRACELET & PURPLE BRAIDED BRACELET
- Measure and cut 3 pieces of 50 cm (12 in) of purple string.
- Seal the ends of all the purple strings with a drop of clear nail polish.
- Locate the middle of all three strings.
- Slide the first crystal bead up strands “b” and “c” and the second crystal bead up strands “a” and “b” as shown.
- How to make the braid
- Keep braiding until the bracelet is 15 cm (6 in) long.
- Slide the big golden bead up the braid.
- Make a simple knot at the end of the braid.
- Cut off the remaining ends of the strands.
- Repeat step 4 for the other side of the bracelet.
- Wrap the end of the braid with adhesive tape.
- Slide it through the big golden bead as shown.
- Remove the tape and make a simple knot with the ends of the braids.
- Repeat the same steps to create pink braided bracelet following the pattern below
LINK BRAIDED BRACELET
- Measure and cut 3 pieces of 80 cm (31 ½ in) of purple nylon cord.
- Fold the threads in half.
- Fold the threads in half.
- Pass the ends of the threads through the loop and tighten them against the ring.
- Attach the charm to the work surface using a piece of adhesive tape.
- Attach the 2 center threads to the work surface with a piece of adhesive tape.
- Make 15 square knots.
- Divide the threads into 3 equal parts.
- Make a 5 cm (2 in) braid with a simple knot at the end.
- Cover the knot with craft glue. Allow 5 minutes to dry, then cut off any excess thread after the knot
- Measure and cut 3 pieces of 1 m (1.1 yd) of light blue nylon cord.
- Fold the threads in half.
- Pass the fold through the ring to make a loop.
- Pass the ends of the threads through the loop and tighten them against the charm.
- Attach the charm to the work surface using a piece of adhesive tape.
- Attach the 2 center threads to the work surface with a piece of adhesive tape.
- Cover the tips of the 2 center ends with craft glue and allow 5 minutes to dry
- Thread 8 faceted beads onto the threads.
- Make a square knot around each bead.
- Make a 5 cm (2 in) braid with a simple knot at the end.
- Cover the knot with craft glue. Allow 5 minutes to dry, then cut off any excess thread after the knot.
- Wrap the end of the braid with adhesive tape.
- Slide it through the bead as shown.
- Remove the tape and make a simple knot with the ends of the braids.
WARNING!
CHOKING HAZARD – small parts. Not suitable for children under 3 years.
STRANGULATION HAZARD – Functional long cord – Adult supervision required.
MAKE IT REAL
1700 Reisterstown Rd Ste 211 Pikesville MD 21208 USA
410-995-8685 Jactin House, 24 Hood
Street
Ancoats, Manchester, M4 6WX UK
+44 (0) 161 302 4100
Made in China
© 2022 MAKE IT REAL, LLC
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>