logitech Zone Vibe 100 Wireless Over the Ear Headphones User Guide
- October 27, 2023
- Logitech
Table of Contents
logitech Zone Vibe 100 Wireless Over the Ear Headphones
KNOW YOUR PRODUCT
Front view:
Back view:
Bottom view:
BOX CONTENT
- Zone Vibe 100 wireless headphones
- Charging cable
- Travel bag
- User documentation
POWER ON / OFF
-
Slide the switch in the arrow’s direction to the middle to power on the headphones.
-
Once powered on, the LED light will slightly turn white.
-
There will be a voice prompt that tells you the battery status.
CONNECT YOUR HEADPHONES
Connect via BLUETOOTH®
- Slide the switch to the bottom in the arrow’s Ndirection for 2 seconds to initiate pairing
- The LED light will flash white rapidly
- Open Bluetooth® settings on your device
- Select Logi Zone Vibe 100 in discoverable devices
- Once successfully paired, the LED light will turn solid white
ADJUSTING HEADPHONES
- Adjust the headphones by sliding earcups up and down the extended part of the headband
- It may be easier to adjust the headphones on your head Slide the earcups up and down the headband until they sit comfortably on your ears
HEADPHONES CONTROLS
For UC controls:
| Usage| Button| Action
Call controls| Answer / End call| Call button| Short press
Reject call| 2 sec press
Music controls| Play / Pause| Music control button| Short press
Track forward| Double press
Volume| Volume up| “+”| Short press
Volume down| “-“
Connectivity| Bluetooth ® pairing| Power button| 2 sec press
Note:
- Media control functionality depends on the type of application
- Call activities are always the first priority When two Bluetooth® devices are connected, the last active device will override the other
Tip: Music EQ controls available on Logi Tune
MUTE
There are 2 ways to mute your microphone.
HEADPHONES LIGHT INDICATOR
| Category | Status | Light | |
|---|---|---|---|
| White | Power | Power ON | Turn solid white and then dim |
| Battery charging | Breathing | ||
| Battery fully charged | Solid | ||
| Connectivity | Bluetooth ® pairing | Fast blinking | |
| Bluetooth ® connected | Turn solid white and then dim | ||
| Link lost | Dim white | ||
| Calls | Active call | Solid | |
| Incoming call | Slow blinking | ||
| Red | Calls | Mute | Solid |
| Power | Low battery (< 10%) | Slow blinking | |
| Factory reset | Fast blink from red to white for three times then LED turn |
off
Note:
- User-triggered behaviors, such as Bluetooth® pairing or link lost, will be prioritized then revert back to its previous status once the behavior is completed
CHARGING
To conserve battery life, headphones automatically power off after 30 minutes without usage. Sleep timer could be adjusted in Logi Tune. The LED light on the headphones will blink slowly in RED when the battery is low.
Charging via USB cable
- Plug one end of the cable to the USB-C port on the bottom of the earcup and the other end into the USB-C charging port on your computer
- The LED light will start breathing white when charging
- The LED light will turn solid white when fully charged
- 2 hours will fully charge the battery
- 5 minutes will give you 1 hour of playback
- The headphones can be used with Bluetooth® paired while charging
LOGI TUNE
Logi Tune helps boost your headphones’ performance with periodic software and firmware updates It is recommended to update your headphones To do so, download Logi Tune from www.logitech.com/tune
ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of
how loud you are talking In Logi Tune, select the sidetone feature, and adjust
the dial accordingly
- A higher number means you hear more external sound
- A lower number means you hear less external sound
AUTO SLEEP TIMER
By default, your headphones will automatically power off when not in use for
30 minutes Adjust the sleep timer in Logi Tune To wake up your headphones, try
sliding off/on the power switch again.
RESET YOUR HEADPHONES
- Power the headphones on.
- Press and hold the call button and volume ’–’ button for 5 seconds.
- The LED light will quickly blink from red to white for 3 times and then turns off when your headphones are successfully reset.
- The headphones will turn off after reset.
DIMENSIONS
- Headphones:
- Height x Width x Depth: 183 03 x 169 68 x 73 mm
- Weight: 0 185 Kg
- Earpad:
- Height x Width x Depth: 98 6 x 75 44 x 19 3 mm
SYSTEM REQUIREMENTS
Works with common calling applications across almost all platforms and operating systems Works with Windows®, Mac, or Chrome™ based computer via Bluetooth® and iOS or Android™ Bluetooth® enabled devices.
TECHNICAL SPECIFICATIONS
- Microphone Type: Dual omni-directional MEMS mics with directional beamforming and DSP
- Frequency response (Speaker): 20-20kHz (music mode), 100-8kHz (talk mode)
- Frequency response (Microphone): 100-8kHz
- Talk time up to 18 hrs
- Listen time up to 20 hrs
- Bluetooth® version: 5 2
- Wireless range: Up to 30 m / 100 ft (open field line of sight)
- Cable length (USB-C charging cable): 4 9 ft (1 5 m)
www.logitech.com/support/zonevibe100
© 2022 Logitech Logitech, Logi and the Logitech logo are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Logitech is under license All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>