logitech POWERPLAY Wireless Charging System User Guide
- June 7, 2024
- Logitech
Table of Contents
logitech POWERPLAY Wireless Charging System User Guide
www.logitech.com/support/powerplay
SETUP INSTRUCTIONS
- Turn off mouse
- Plug in charging base
- Replace weight module with POWERCORE charging module
- Turn mouse on
FAQ/TROUBLESHOOTING
G logo on POWERPLAY control box does not illuminate
– Ensure USB cable is firmly connected directly to PC and POWERPLAY control
box, or to a powered USB hub
G logo on POWERPLAY control box continuously flashes blue while plugged
into PC
— LED flashing blue indicates mouse is not paired to the integrated LIGHTSPEED
wireless receiver in POWERPLAY control box Turn mouse off, wait three seconds,
and turn it back on Mouse and integrated LIGHTSPEED wireless receiver should
pair automatically
— If mouse has been previously paired to another POWERPLAY charging base, ensure that the mouse’s included Nano receiver is not plugged in Then turn mouse off, wait three seconds, and turn it back on Mouse and integrated LIGHTSPEED wireless receiver should pair automatically
Mouse does not charge or power on, white LED on POWERPLAY control box does
not turn on
— Ensure POWERCORE module is properly inserted in compatible wireless gaming
mouse (G703 or G903 wireless gaming mouse) magnets should connect firmly and G
logo should be oriented as shown
— If POWERPLAY is placed on a metal table, charging performance may be
degraded or prevented entirely Do not use on a metal table
— Ensure there are no foreign objects (e g keyboards or mobile phones) on
charging base Charging performance may be degraded or prevented entirely
— Ensure POWERCORE module is positioned inside charging area (see diagram
below) when not in use
Field size and shape is approximate
— Ensure only one POWERCORE module is located on charging base – POWERPLAY
charging base produces only enough power to charge one device at a time
— Ensure mouse battery is not removed POWERPLAY charging base cannot power
a mouse with no battery Removing the battery from a G703 or G903 wireless
gaming mouse voids its warranty
— If mouse battery is at 0%, it may take up to 5 minutes for adequate
charge to be built up for use For faster charging, or to charge to 100%, plug
included USB cable into mouse
— POWERPLAY charging base is validated for use only with included cloth or
hard mouse pad, or their retail replacement equivalent Thicker pads or pads
made of different materials (such as metal) can cause charging performance to
be degraded or prevented entirely
Battery does not charge to 100%
— This is by design, and is intended to minimize power emission and
optimize battery cycles Mouse battery level will be maintained between 85% and
95% while powered by the POWERPLAY charging base
White LED goes dim or turns off
— The white LED indicates three states: no connection between POWERPLAY
and POWERCORE (LED off), connection between POWERPLAY and POWERCORE, but
charging is not active (LED dim white), and connection between POWERPLAY and
POWERCORE with charging active (LED bright white)
Can I use a different USB cable than the supplied one?
— No POWERPLAY is designed to be used with the included USB cable only
Can I physically modify the POWERPLAY charging base?
— No Do not cut, fold, roll, bend, or otherwise modify POWERPLAY charging
base Doing so will void the warranty and may damage the charging coil
QUESTIONS
http://support logitech com/product/POWERPLAY
© 2017 Logitech All rights reserved Logitech, Logi and other Logitech marks
are owned by Logitech and may be registered All other trademarks are the
property of their respective owners Logitech assumes no responsibility for any
errors that may appear in this manual Information contained herein is subject
to change without notice
WEB-621-000823 002
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>