nedis DAB+/FM Radio with Alarm Clock Radio User Guide

June 7, 2024
nedis

nedis - Logo

DAB+ / FM Radio with alarm clock radio
RDDB5110BK

nedis DAB+FM Radio - Cover

http://ned.is/RDDB5110BK

nedis DAB+FM Radio - Overview 1

nedis DAB+FM Radio - Overview 2

Quick start guide

DAB+ / FM radio

**RDDB5110BK

** For more information see the extended manual online: ned.is/rddb5110bk

Intended use

The product is exclusively intended to be used as a radio with alarm clock. Any modification of the product may have consequences for safety,  arranty
and proper functioning.

Main parts (image A)

1. DAB+ / FM radio 5. Power button 9. Menu button 13. Antenna
2. Tune knob 6. Preset button 10. Pause / Play / Enter button 14.

Micro-USB charging port
3. Display| 7. Mode button| 11. Info button| 15. Charging indicator LED
4. Volume knob| 8. Alarm button| 12. Scan button| 16. AUX in

Safety instructions

WARNING

  • Only use the product as described in this manual.
  • Read the instructions before use.
  • Do not let water enter the product.
  • Do not use the product in wet or damp environments.
  • Do not use the product in dusty environments.
  • This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.

Setup

  1. Connect the micro USB cable to A ****and an USB adapter.

  2. Connect the adapter to a power outlet to charge the radio.
    The charging indicator LED A lights up during charging. A full charge takes approximatey 3 hours. 4

  3. Extend the antenna A .
    Alternatively, you can use built-in battery.

Setting date and time
**** If a DAB+ signal is found, date and time will be set automatically.

DAB+ mode

  1. When the radio is in FM or AUX mode, press Mode A to switch to DAB+.
    The radio will scan for available DAB+ stations automatically.

  2. Turn Tune A ****to switch stations.

FM mode

  1. When the radio is in DAB+ or AUX mode, press Mode A to switch to FM.
    The radio will scan for available FM stations automatically.

  2. Turn Tune A ****to switch stations.

AUX mode

  1. Connect a device via a 3.5 mm jack to the AUX port A ****.
  2. When the radio is in DAB+ or FM mode, press Mode A ****to switch to AUX.

Using presets

  1. Press and hold Preset A to save the current station.
    You can save up to 40 DAB+ stations and 40 FM stations.

  2. Turn Tune A ****.

  3. Press Enter A **** to confirm.

Using the menu

  • Press Menu A ****to enter the menu.

Using the alarm

  • Turn Tune A ****to choose between:
  • Press Enter A ****to confirm.
Scan Scan for radio stations
Time / date Set date and time
Backlight Switch the backlight of the LCD display on or off
Contrast Change the contrast level of the LCD display on or off
System version Check the system version
Factory reset Reset to factory defaults

**** Two different alarms can be set.

  1. Press A ****to select alarm 1.
  2. Press A ****again to select alarm 2.
  3. Press Enter A ****to confirm.
  4. Turn A to set the hours of the wake up time. Press A to confirm.
  5. Turn A to set the minutes. Press A to confirm.
  6. Turn A to choose the source of the alarm: DAB+ / FM or buzzer. Press A to confirm.
  7. Turn A to choose when to sound the alarm. Choose between Daily / Weekends / Weekdays / Once. Press A to confirm.
  8. Turn A to set the alarm volume. Press A to confirm.
  9. Turn A to switch the alarm on or off. Press A to confirm.

Snoozing and switching off the alarm

  1. Press Enter A ****to snooze the alarm
  2. Turn A to select the snooze time between 5/10/15/30 minutes. Press A to confirm.
  3. Press A ****to switch off the alarm.

Specifications

Product DAB+ / FM radio
Article number RDDB5110BK
Dimensions (l x w x h) 200 x 110 x 110 mm
Weight 800 g
Power input 5 VDC – 500 mA
Power (RMS) 1.5 W
Peak power 4.5 W
Radio bands DAB+ / FM
DAB+ frequency 174 – 240 MHz
FM frequency 87.5 – 108 MHz
Preset channels 80 (40 DAB+, 40 FM)
Tuning type PLL
Play time Up to 4 hours
Battery capacity 1200 mAh
Charging time 3 hours
LCD display Yes
Alarm clock Yes
Snooze function Yes
Connection Aux input, micro USB

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product RDDB5110BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/RDDB5110BK#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals