tekkiwear B30 Smart Wristband User Manual
- October 30, 2023
- TeKKiWear
Table of Contents
B30 Smart Wristband
User Manual
B30 Smart Wristband
Before using the smart wristband, please first go through this use manual.
Start to use
Side key
Long press: Startup and Power-off
Click: Return to the main interface, screen on, screen off
Operation description
- Make sure the wristband has enough power to start up for initial use, otherwise please fully charge it. The wristband will automatically start up after being fully charged. Align the charging port to the charging adaptor to adhere both magnetically, until the wristband screen displays the charging icon (charging for 2-3 hours continuously with a 5V charging adaptor)
- Start-up: Press and hold the power key for 3s to start up the wristband when it is under poweroff state. The wristband will automatically start up when charging.
- Power-off When the wristband is under power-on state, press and hold the power key, the screen will display the power-off interface, select YES then the wristband will automatically power off; or slide down the main interface, click the Settings icon and enter the Settings interface, click System Settings to enter the corresponding interface and click Power-off, then the wristband will automatically power off (you can also restart and reset the wristband through this interface).
All-touch Mode
The wristband is available for all-touch operations: The clock interface can
be shifted upwards, downwards, leftwards and rightwards, and the subpage
supports right-slide return.
Download and pairing
1. Search F Fit at a popular application store, and download the F Fit App, or scan the following QR code to download it. (Please attach the QR code diagram)
https://itunes.apple.com/app/id1466929052
In order to have better use experience. Please upgrade your APP to the latest
version when it is available.
2. Open the APP, select the device that you intend to bind from the App’s
device list, and complete the pairing operation by following the tips. When
pairing, please Make sure that the bluetooth names displayed on your phone and
your wristband are identical.
Equipment model
After start-up, slide down to switch to the multi-function interface, click
the “Gear” icon to enter the “Settings” interface, then enter the “System”,
and click “About” to check the equipment model of the wristband, then find the
corresponding equipment model in the APP terminal and click it to connect
B30 <
wristband model
V3.6 < firmware version number
ABCE < last four digits of MAC
Bluetooth connection
When the bluetooth is not connected, the bluetooth icon is hollow.
When the bluetooth is successfully connected, a bar will be displayed in the
bluetooth icon. Upon successfully connection, data will instantly synchronized
to the App, and can be viewed at the App terminal, as shown in the lower right
corner of the following figure
Function Introduction
Theme interface display
Click Settings, and enter the themes to simply select different styles of
clock display, or use more theme interfaces through the APP. 
Normal mode display
Multi-function display
Support QR code download, settings, DND mode, Find My Phone, luminance
adjustment Find My Phone
Click the “Find My Phone” icon, the phone term inal will vibrate or send
sounds 
Main interface slide-down
Menu list: Support more functional modes, as shown in the following figure
Motion mode
Click the motion icon to activate the motion mode, which supports nine sports,
including running, brisk walking, mountaineering, cycling, football,
basketball, badminton, table tennis, and swimming. In each sport mode, the
sporting time, heart rate and Calorie consumption can be displayed on the
interface. Click the motion icon to activate the motion mode, press and hold
the side key to quit the motion mode.
FAQ
1. The wristband can't be identified when pairing.
2. Why there is occasional bluetooth connection failure?
For certain phones, occasional bluetooth activation failure may occur; To establish bluetooth connection in case of such failure, please simply restart your phone or reactivate the bluetooh.
3. How to restore factory settings?
4. How to update the wristband's firmware?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>