nedis Dummy Alarm Flashlight User Manual
- June 7, 2024
- nedis
Table of Contents
DUMSS10WT
DUMSS20WT
Dummy Alarm Flashlight
Introduction:
Professional-looking dummy alarm siren with a deterring effect. Made of plastic housing and fitted with a continuously flashing LED indicator.
- We recommend that you read this manual before installing/using the camera system.
- Keep this manual in a safe place for future reference.
Packaging content:
- Dummy alarm flashlight
- Security sticker
- Manual
Technical specifications:
- Housing: plastic
- IP protection: IP44 (splash- & dustproof)
- Battery: 3x AA 1.5 V (not included)
- Dimensions DUMSS2OWT: 280 x 198 x 98 mm
- Weight DUMSS2OWT: 706 g
Placing the batteries DUMS520WT
- Remove the screw marked in the image, using a screwdriver.
- Open the housing. Place 3x AA 1.5 V batteries in the battery compartment, matching the polarity markings (+ and -) to activate the flashing LED. Close the housing and replace the screw after placing the batteries.
Maintenance:
Clean the housing with a dry or damp cloth. Do not use cleaning solvents or abrasives.
Warranty:
Any changes and/or modifications to the product will void the warranty. We cannot accept any liability for damage caused by the incorrect use of this product.
Disclaimer:
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective holders and are hereby recognized as such.
Disposal:
- This product is designated for a separate collection at an appropriate collection point. Do not dispose of this product with household waste.
- For more information, contact the retailer or the local authority responsible for waste management.
This product has been manufactured and supplied in compliance with all relevant regulations and directives, valid for all member states of the European Union. It also complies with all applicable specifications and regulations in the country of sales.
Formal documentation is available upon request. This includes, but is not limited to: Declaration of Conformity (and product identity), Material Safety Data Sheet, product test report.
Please contact our customer service desk for support:
via the website: http://www.nedis.com/en-us/contact/contact-form.htm
via e-mail: service@nedis.com
via telephone:+31 (0)73-5991055 (during office hours)
NEDIS B.V., De Tweeling 28, 5215 MC ‘s-Hertogenbosch, THE NETHERLANDS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>