SCHLAGE B-Series Deadbolts Installation Guide
- June 7, 2024
- Schlage
Table of Contents
B-Series Deadbolts
47280668
B60, B60CS, B60F, B62
Installation Instructions
Key
Latch/strike screws
Bolt
Check door preparation.
If dimensions do not match, you may need to modify your door.
For B60F, B60CS Only: install UL cup.
Install the bolt.
Adjust bolt as necessary.
No mortise? See Drive-in faceplate.
If necessary, remove the ring.
Install the outside housing.
Choose the image that matches your door.
Install the inside housing.
Install the strike.
Hole must be at least 1 1/4″ (32 mm) deep.
Test lock.
- Try locking and unlocking from outside.
- If the lock will not lock and unlock, remove the lock and rotate the tailpiece 90º (see step 5).
- Reinstall the lock and restest.
Change faceplate.
-
Remove faceplate.
-
Remove backplate.
-
Install drive-in faceplate.
Customer Service
U.S.A.: 888-805-9837
Canada: 800-900-4734
Mexico: 018005067866
www.schlage.com
Warranty: alle.co/reswarranty
© Allegion 2020 Printed in U.S.A.
47280668 Rev. 03/20-a
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>