nedis Fabric Powerbank 10000mAh User Guide

nedis Fabric Powerbank 10000mAh User Guide

Fabric Power bank 10000 mAh Timeless design wrapped in a stylish woven

fabric
FSPB10100BK
FSPB10100GY

Quick start guide

Fabric Powerbank                FSPB10100BK
10000 mAh                         FSPB10100GY

For more information see the extended manual online:
ned.is/fspb10100bk | ned.is/fspb10100gy

Intended use

This product is exclusively intended to charge external devices. Any modification of the product may have consequences for safety, warranty and proper functioning.

Parts list (Image A)

1. Charging indicator LED
2. Power button
3. Micro USB input
4. USB output (2x)
5. USB cable

Safety instructions

WARNING

•  Only use the product as described in this manual.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
• Disconnect the product from the electrical outlet and other equipment if problems occur.
• Do not open the product.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• If battery fluid gets in your eyes, do not rub your eyes. Wash your eyes with clean water and immediately contact a physician.
• Do not expose the product to direct sunlight, naked flames or heat.
• Do not expose the product to water or moisture.
• Do not drop the product and avoid bumping.
• When charging, do not place the product on flammable materials such as rugs, carpets or bedding.
• Keep the product out of reach from children.

Charge the power bank (Image B)

The product comes pre-charged and ready to use. If the battery is empty, charging can take up to 4 hours.

1. Insert A5 into A3.
2.  Insert the other end of A5 into a computer or power adapter. Connect it to the mains.
   A1 will indicate that the internal battery is charging.
   Each light represents 25% of the full charge.
   –To extend the lifetime of the battery, charge the product periodically if it is left unused for extended periods.

Charging your device (Image C)

1. Press A2.
2. Insert one end of the charging cable of your device (not included) into A4.
3. Connect the other end of the cable into the charging port of your device. The product begins charging your device.

Specifications

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>