ERGEAR Monitor Desk Mount Instruction Manual
- June 7, 2024
- ERGEAR
Table of Contents
- IMPORTANT SAFETY INFORMATION
- Weight Restrictions
- Check the VESA Pattern of Your Monitor before You Begin the Installation
- Product Features
- Parts and Hardware Included
- A. USB Cables Installation Method (USB Cables are Not Included)
- B1. Table Edge Installation
- B2. Grommet Installation
- C. Attach Monitor to the Arm
- D. Adjust Gas Spring Tension
- E. Directional Usage Guide
- F. Adjust Tilt Angle
- G. Set Swivel Tightness
- H. Adjust the Rotation Angle
- I. Route the Wires along the Arm
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ERGEAR Monitor Desk Mount Instruction Manual
Thank you for choosing this Ergear product! At Ergear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact at support@ergear.com (US/CA/DE/UK/FR/IT/ES/AU)
IMPORTANT SAFETY INFORMATION
Please carefully read all instructions before attempting installation. If you
do not understand the instructions or have any concerns or questions, please
contact our customer service at
support@ergear.com
CAUTION : Avoid potential personal injuries and property damage!
- Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
- This product contains a high pressure gas spring, fire and percussion prohibited. Also it is strictly prohibited to dismantle without professionals. Please return to the manufacturer or hand over to professional agencies if the product is abandoned.
- The desk must be capable of supporting three times the weight of the total load (the mount, the monitor and all accessories weight). Don’t use the product on particle board.
Weight Restrictions
Check the VESA Pattern of Your Monitor before You Begin the Installation
If your monitor VESA is greater than 100×100 mm/4×4 in. or less than VESA 75x75mm/3x3in., this mount is NOT compatible.
If this desk mount is NOT compatible, please contact customer service at support@ergear.com to find a compatible product.
Product Features
TENSION ADJUSTMENT SHOULD BE DONE ONLY AFTER MOUNT INSTALLATION
Do not adjust tension without monitor
- Ensure monitor has been attached to the mount.
- Read your monitor box or manual to find out monitor net weight.
- Ensure the net weight of monitor (including accessories) is between
- 4~14.3 Ibs (2.0-6.5 kg)
Parts and Hardware Included
A. USB Cables Installation Method (USB Cables are Not Included)
B1. Table Edge Installation
B2. Grommet Installation
C. Attach Monitor to the Arm
D. Adjust Gas Spring Tension
-
If the monitor can stay at the desired height by itself, no adjustment needed.
-
If the monitor rises up, press the arm to keep it in horizontal position and then use the 13/64 in.(5mm) Alley key (G) to turn the bolt
clockwise(“-” direction) to reduce tension of the arm only until the monitor can stay at the desired height by itself. -
If the monitor falls down, lift the arm to keep it in horizontal position and then use the 13/64 in.(5mm) Alley key (G) to turn the bolt counter-clockwise (“+” direction) to increase tension of the arm only until the monitor can stay at the desired height by itself.