ErGear Monitor Table Stand EGCM1 Instruction Manual

Monitor Table
Stand Instruction Manual
v1.0 Model:EGCM1

Thank you for choosing this Ergear product! At Gear, we strive to provide you with the best quality products and services in the industry. Should you
have any issues, please don’t hesitate to contact us at support@ergear.com.(US/CA/DE/UK/FR/IT/ES/AU) メール:supportjp@ergear.com

UNPACKING INSTRUCTIONS AND IMPORTANT SAFETY INFORMATION

• Carefully open the carton, remove contents, and layout on cardboard or another protective surface to avoid damage.
• Check package contents against the Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts.
• Not all parts and hardware included will be used. if you require replacement parts, contact customer service at support@ergear.com
• Carefully read all instructions before attempting installation.
• If you do not understand the instructions or have any concerns or questions, please contact customer service at support@ergear.com
• This product may contain moving parts. Use with caution.
• Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied Parts and Hardware

STEP 1A For C Clamp Mounting

STEP 1A-1 Install part [02] to pole [01]

STEP 1A-2 Adjust the amount according to the thickness of desktop

STEP 1A-3 Install part [03] to part [02]

STEP 1A-4 Secure the mount to the desktop

STEP 1B For Grommet Mounting

STEP 1B-1 Remove part [a] from part [03] STEP 1B-2 Secure the mount to desktop

STEP 2 Install Cable Clips [06] [07] & Monitor Connector [04] to Pole [01]

STEP 2-1
Slide the cable clip [06] and monitor connector [04] to the pole [01] STEP 2-2 Secure monitor connector [04] to the pole [01] then attach the cable clips [07] to the monitor connector [04]

STEP 3 Check Monitor Hole Pattern and Select Monitor Bolts

Bolt length: Verify adequate thread engagement with bolts or bolts/spacers combination. We recommend thread engagement by at least 5 turns.
-Too short will not hold the monitor.
-Too long will damage the monitor.

STEP 4 Attach the Monitor Plates [05] to the Monitors

STEP 5
Hang Monitors to the Stand and Secure with Knob [C] and Bolts [D]

STEP 6 Fix Tilt Angle of the Monitors

STEP 7 Manage Cables

STEP 8 Store Allen Keys into the Cable Clip

Features

Individual VESA plate height adjustment helps monitors to be perfectly aligned.

Thank you again for
choosing this Ergear product!

All of us at Ergear do appreciate your product purchase. We hope that
you are as happy with your product as we are designing and
manufacturing it for you. We strive to provide you with the best quality
products and services in the industry. Should you have any issues,
please don’t hesitate to contact us at
support@ergear.com (US/CA/DE/UK/FR/IT/ES/AU)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>