nedis Bluetooth Headphones User Guide
- June 7, 2024
- nedis
Table of Contents
nedis Bluetooth Headphones User Guide
Specifications:
- Max. play time: up to 15 hours
- Standby time: up to 250 hours
- Bluetooth® version: 5.0
- Bluetooth frequency range: 2402 – 2480 MHz
- Max. transmit power: 4 dBm
- Frequency response: 20 Hz – 20 kHz
- Driver diameter: 40 mm
- Impedance: 32 ohm
- Built-in microphone: yes
- Foldable ear pads: yes
- Max. charging time: up to 2.5 hours
- Power input: 5 V DC / 500 mA
Description
Pairing the headphones
- Activate Bluetooth on your Bluetooth device.
- Press and hold the button for 5 seconds to switch on the device and enter into pairing mode.
- On your Bluetooth device, search for new devices.
- Select the device: “HPBT1100BK”.
- The Bluetooth device will confirm when the pairing is completed.
- If the pairing is completed successfully, the device is in playback mode.
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
Cleaning and maintenance
Warning!
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>