beper Juice Extractor Instructions
- June 7, 2024
- beper
Table of Contents
beper Juice Extractor Instructions
For further information and/or for instructions for use in other languages , please visit: beper.com
GENERAL SAFETY ADVICE
READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE FIRST USE OF THE APPLIANCE.
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenance and help you avoid mishaps
and possible accidents.
- Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources.
- It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
- Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
- If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
- Never pull the supply cord to unplug the appliance.
- Make sure that the supply cord never comes into contact with hot or cutting surfaces
- Do not use this appliance if the supply cord is damaged. In case of damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Only connect this appliance on alternating current Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
- This appliance is to be destined to its special purpose only.
- Any other use is to be considered as improper and thus dangerous.
- The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
- To avoid any heating risk, it is recommended to unroll completely the supply cord and to unplug the appliance, when not used.
- Before cleaning, always unplug the appliance.
- To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
- Do not hold the appliance with wet hands or feet.
- Do not hold the appliance with naked feet.
- Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail.
- Do not use the appliance near explosives, highly flammable materials, gases, burning flames, heaters.
- DO NOT ALLOW CHILDREN, DISABLED PEOPLE OR EVERY PEOPLE WITHOUT EXPERIENCE OR TECHNICAL ABILITY TO USE THE APPLIANCE IF THEY ARE NOT PROPERLY WATCHED OVER. CLOSE SUPERVISION IS NECESSARY WHEN ANY APPLIANCE USED BY OR NEAR CHILDREN.
- MAKE SURE THAT CHILDREN DO NOT PLAY WITH THIS APPLIANCE.
- IF YOU DECIDE NOT TO USE THE APPLIANCE ANY LONGER, MAKE IT UNSERVICEABLE BY SIMPLY CUTTING THE SUPPLY CABLE AFTER DISCONNECTING THE PLUG FROM THE SOCKET.
- ALSO MAKE ANY DANGEROUS PARTS UNSERVICEABLE, ESPECIALLY FOR CHILDREN WHO COULD PLAY WITH THE APPLIANCE.
DESCRIPTION OF THE COMPONENTS
- Presser
- Lid
- Centrifugal filter
- Filter base
- Locking clip
- Removable pulp container
- Motor base
- ON/OFF knob
- Non-slip feet
- Power cord
- Plastic beaker
USE INSTRUCTIONS
After you have removed the appliance from the wrapping you have to wash all the components, except for the motor base, in warm soaping water.
ASSEMBLING
- Place the motor unit on a flat, dry surface.
- Place the container and the beaker on the motor body, insert the filter base and the centrifugal filter by applying a little pressure.
- Place the lid by inserting the groove in it into the slot placed on the filter base.
- Lift the locking clip to insert it into the slots of the cover until you hear a click.
- The centrifuge is equipped with a safety lock; to make it work the lid must be well closed with the locking clip.
- Proceeding with the reverse operations, the various components of the centrifuge will be removed; operation necessary to proceed with cleaning.
HOW TO OPERATE
- Wash well and cut the fruit and vegetables that you want to centrifuge into small pieces.
- Fruit with a thick peel must be peeled. Remove the hard parts like kernels and seeds from fruits (as from peaches, apricots, cherries, plums, melons, etc.).
- IMPORTANT: The juice obtained must be consumed within 24 hours.
- Connect the power cord to the electrical outlet. Making sure that the on/off knob is set to 0.
- Place the on/off knob on I, insert the pieces of fruit or vegetables into the mouth of the lid and press lightly with the presser.
- !CAUTION! Do not use your fingers to press the fruit.
- During the centrifuge of the fruit and vegetable it is possible to position the on/off knob on the position II for greater speed.
- Do not run the appliance for more than 1 minute. Allow the engine to stand for at least 2 minutes before restarting.
- At the end, turn off the appliance by setting the on/off knob to 0.
- Unplug the power cord from the electrical outlet.
- Pour the juice into a glass to be served.
CLEANING AND MAINTENANCE
- Ensure that the appliance is unplugged.
- We recommend cleaning immediately after use, better before food residues get dry.
- Clean the motor body with a damp cloth. Do not immerse in water. Do not spray cleaning liquids directly on the motor body.
- Clean the presser, the lid, the filter base and the container with warm water and dish detergent.
- Wash the centrifugal filter with water, you can also use a Non-Metallic brush ; pay lots of attention as the blades are sharp.
TECHNICAL DATA
- Power: 500W
Power supply: 220-240V~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
Disposal
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR ATER SALES DEPARTMENT BEPER. E-MAIL assistenza@beper.com WHICH WILL FORWARD YOUR ENQUIRIES TO YOUR DISTRIBUTOR.
Contact Us
BEPER SRL
Via Salieri, 30
37050 – Vallese di Oppeano – Verona
Tel. 045/7134674
Fax 045/6984019
e-mail: assistenza@beper.com
beper.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>