beper Milk Frother Instructions
- June 7, 2024
- beper
Table of Contents
beper Milk Frother
GENERAL SAFETY ADVICE
GENERAL SAFETY ADVICE
READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE FIRST USE OF THE APPLIANCE.
- Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.
- Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources.
- It is recommended not to throw these packing material in the dome-stic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
- Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
- If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
- Never pull the supply cord to unplug the appliance.
- Make sure that the supply cord never comes into contact with hot or cutting surfaces
- Do not use this appliance if the supply cord is damaged. In case of damage, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Only connect this appliance on alternating current
- Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
- This appliance is to be destined to its special purpose only.
- Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
- To avoid any heating risk, it is recommended to unroll completely the supply cord and to unplug the appliance, when not used.
- Before cleaning, always unplug the appliance. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
- Do not hold the appliance with wet hands or feet.
- Do not hold the appliance with naked feet.
- Do not expose the appliance to atmospheric agents such as rain, wind, snow, hail.
- Do not use the appliance near explosives, highly flammable mate- rials, gases, burning flames, heaters.
- Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.
- Make sure that children do not play with this appliance. If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply cable after disconnecting the plug from the socket. ALSO MAKE ANY DANGEROUS PARTS UNSERVICE- ABLE, ESPECIALLY FOR CHILDREN WHO COULD PLAY WITH THE APPLIANCE.
General safety instructions
-
Before using this appliance, read carefully these instructions for use and keep them together with the warrantee certificate, the receipt and, if possible, the paperboard box with inner packing. If you hand over the appliance to a third party, also pass on the operating instructions.
-
This appliance is only intended for domestic use, and exclusively according to the type of application envisaged Keep the appliance away from excessive heat, from direct exposure to sunlight and from humidity, do not submerge appliance’s base and power cable in water and/or other fluids. Keep the appliance away from sharp edges and sharp objects. Do not use the appliance with wet/moist hands.
-
Always turn the appliance off and unplug it from the wall socket (by pulling the socket, not the power cable) when the appliance is not in use, during mounting of accessories or in case of malfunction of the appliance.
-
Do not leave the appliance operating unattended. Always turn the appliance off before leaving the room. Unplug the appliance from the wall socket.
-
Regularly check the appliance and its power cable, to detect any possible damage. In case damages are spot-ted, do not use the appliance.
-
Do not try to repair the appliance. Always consult authorized technical personnel for repairing operations. Use original accessories only.
-
For child safety, keep all packing materials (plastic bags, paper box, Styrofoam, etc.) away from children.
Specific safety operation instruction for this appliance -
Do not exceed the maximum level marked inside the container
-
During operation, make sure to keep away from moving parts
-
Do not use metal or sharp objects to avoid scratching and damaging of the inside of the container
-
Use the appliance only with the magnetic base provided with the appliance
-
Operate the appliance only with the lid closed
-
Do not use the appliance with any food other than milk
-
Before cleansing, make sure that the appliance is off, unplugged from the wall socket and cool.
-
Do not place the appliance and its base close or above gas stoves, or other heating sources
-
Exercise extreme care when moving the container filled with hot milk, to avoid any risk of burning
-
Do not operate the appliance empty
-
It is advisable to clean the product right after use to avoid that milk residues remain attached to the walls Before storing, make sure to clean the appliance thoroughly
-
The appliance has 2 different magnetic accessories:
-
A plastic accessory with metal spiral, for milk frothing
-
A plastic accessory, for mixing
Operating and use instructions
- Place the magnetic base on a flat, anti-slippery surface.
- Place the chosen accessory on the base of the container.
- Pour milk according to the MIN/MAX levels marked inside the container, as follows:
MAX x1= maximum amount of milk to froth for 1 cup (100 ml)
MAX x2= maximum amount of milk to froth for 2 cups (250 ml)
MAX x1= maximum amount of milk to heat and mix for 1 cup (150 ml)
MAX x2= maximum amount of milk to heat and mix for 2 cups (350 ml).
WARNING: for best results, always use whole milk to froth. Soy milk and lactose free milk will not give the same results.
-
Place the lid on the container.
-
Plug the appliance to the wall socket.
-
Press one of the two function buttons on the appliance, as follows:
Functions -
For heating and/or hot frothing
-
For extra heating and/or extra hot frothing
-
For cold frothing.
Cleansing
- Always unplug the appliance before cleansing
- Let the appliance cool down
- It is recommended to clean the appliance right after use and before storing it
- Never submerge the magnetic base into water during cleaning operations
- Do not use metallic brushes or other abrasive objects
- Do not use aggressive or abrasive detergents.
Magnetic base
Clean the external surface of the magnetic base with a damp cloth, without
using detergents Accessories, container and lid must be hand washed with hot
water and dish soap.
Note: to remove mixing/frothing accessories, pull them upwards.
Technical data
Power: 550-650W
Adapter: 220-240V~ 50Hz , Class I
For any improvement reasons, Beper reserves the right to modify or improve the
product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee ap-plies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the appliance’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge. In any case, if the part to be
replaced for defect, breakage or malfunction is an accessory and/or a
detachable part of the product, Beper reserves the right to replace only the
very part in question and not the entire product
CONTACT YOUR DISTRIBUTOR IN YOUR COUNTRY OR ATER SALES DEPARTMENT BEPER.
E-MAIL as-sistenza@beper.com WHICH WILL FORWARD
YOUR ENQUIRIES TO YOUR DISTRIBUTOR.