iLuv TrueBT Air User Manual
- June 7, 2024
- iLuv
Table of Contents
TrueBT Air
No Wire, True Wireless Stereo In-ear Earbuds with Charging Case
IPX4 LEVEL OF PROTECTION FROM WATER INTRUSION
User Manual
Overview of the Product
What’s Included
- Medium size ear tips are premounted on the earbuds.
**Attention
**
Please charge your TrueBT Air before use. Earbuds will be automatically turned on when removed from the charging case. When the earbuds are charged enough for your use, insert them into your ear canals and voice guidance will begin in 5 seconds after being removed from the charging case.
IPX4
IPX4 rated TrueBT Air can resist water splash and sweat but must not be merged inside water or left in a wet place for a long time.
Wear Earbuds
TrueBT Air earbuds are designed with angled in-ear tips for each left and
right ear to provide a comfortable and secure fit. Insert each earbud into
your left and right ear, and lightly rotate to fit in your ear canal. Try each
of the different ear tip sizes.
Power On and Pairing
After opening a new package initially, follow these steps. Skip step 5-1 when
the earbuds are taken from the charging case. The right earbud is assigned as
the master earbud by default and connects to the left earbud (slave earbud)
automatically.
1. To turn on, press multifunction buttons on BOTH earbuds for 2 seconds
2. Turn on Bluetooth on your mobile device
a. Go to settings
b. Turn on Bluetooth
c. Scan for and
select
“iLuv TrueBT Air”
d. Voice Prompt: “Pairing Successful” on the right earbud
6. Music Playback
1. Once paired, open the music app on your mobile device
2. Click a multifunction button on either of the
earbuds to play
3. Click a multifunction button again to pause
7. Voice Command
1. Double click a multifunction button on any earbud.
2. Siri on iPhone or Google Assistant on
Android phone will be activated.
3. Ask questions or commands with your voice
8. Answer the Call
1. When you receive an incoming call, click a multifunction button on any
earbud to answer the call.
2. Click a multifunction button again to hang up
3. Hold the multifunction button for 1 second to decline when you receive an
incoming call
Charging
Charging Case
Fully charged charging case can recharge the earbuds up to 5 times and provide
up to 30 hours of playtime on the go in total.
1. Insert the smaller end of the included 3ft Micro USB charging cable into
the Micro USB charging port on the Charging Case
2. Insert the other end of the Micro USB charging cable into a USB wall
charger or a USB port on a computer
Earbuds
Fully charged earbuds support your active lifestyle with up to 6 hours of
playtime.
1. Put the earbuds in the charging case and close the lid. The earbuds will
turn off automatically and start charging. The cover must be closed so that
the earbuds are connected to charging pins securely.
2. While charging, the red LED indicators on the backside of the charging
case will be on.
3. When fully charged. LED will turn off.
4. When you take the earbuds out of the charging case, the earbuds will turn on automatically.
Power Off/On
When you use the charging Case
1. Put the earbuds in the charging case and close the lid. The earbuds will
turn off automatically and start charging.
2. When you take the earbuds out of the charging case, the earbuds will turn on and connect to the previously paired phone automatically.
When you use the multifunction button
1. Press the multifunction button on any earbud for 3 seconds to turn off
both earbuds.
2. Press multifunction buttons on BOTH earbuds for 2 seconds to turn on the earbuds. The earbuds will connect to the previously paired phone automatically.
11. Reconnecting the Left & Right Channels
In most cases, you can reconnect two earbuds by inserting both earpieces into
the case.
1. Insert the earbuds into the case and close the lid for about 15 seconds.
2. Remove them from the case so they will reconnect.
Frequently Asked Questions
-
After charging earbuds from the charging case, should I connect them to my phone via Bluetooth again?
No, you don’t need to. When you take them out of the charging case, they automatically connect to your previously connected device. -
Should I turn off the power before charging and turn on the power after charging the earbuds?
No, you don’t. When you place the earbuds inside the charging case and close the lid, they will be turned off automatically. Then, they will start charging. When you take them out of the charging case, they will be automatically turned on. -
What is music playtime?
When the earbuds are fully charged, you can play music or talk for up to 6 hours which varies depending on the music content and volume. Standby time is up to 100 hours. Since the charging case can charge both earbuds 5 times, you can play music for up to 30 hours with 5 times of charge.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
Hereby, LUV Creative Technology declares that the radio equipment type TrueBT Air is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.iluv.com
iLuv Creative Technology erklärt, dass das Party On Air Bluetooth Gerät mit der RED 2014/53/EU Richtlinie konform ist. Der vollständige Text der Konformitätserklärung ist auf der http://support.iluv.com/support.asp?section=manual Webseite abrufbar.
Thank you for purchasing your new iLuv product. We are fully committed to providing our customers the utmost satisfaction through the use of our products. For warranty service, please visit us at www.support.iluv.com and submit a ticket with your date of purchase, product model number, and a brief summary of your issue. In the event of any issues with your product(s), please review the troubleshooting section provided in the user manual. For further assistance, please contact us VIA customer service and speak to one of our representatives.
ONE YEAR LIMITED WARRANTY
EUROPEAN UNION
TWO YEARS LIMITED WARRANTY
Documents / Resources
| iLuv
TrueBT
Air
[pdf] User Manual
iLuv, TrueBT Air
---|---
References
- iLuv Support
- support.iluv.com/support.asp?section=manual
- iLuv Creative Technology - The premier provider of mobile accessories
- iLuv Support
- Security & Privacy Policy – iLuv Creative Technology
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>