iLuv vibrosaverulbk VibroSaver Extremely Strong Vibration Bed Shaker Smart WiFi Alarm Clock User Manual

iLuv vibrosaverulbk VibroSaver Extremely Strong Vibration Bed Shaker

Smart WiFi Alarm Clock

What’s Included

Overview

VibroSaver is a smart Wi-Fi alarm solution that can be controlled on your smartphone through the app.
VibroSaver Cloud service allows you to get access to VibroSaver from anywhere anytime through the internet. You can use the VibroSaver app to set up VibroSaver and set multiple alarms with repeat options, and voice services such as Alexa or Google Assistant to control the alarm function.

Where to Place the VibroSaver

Place VibroSaver under your pillow.

1. Keep connected to the power to ensure the VibroSaver vibrates to scheduled alarms and Vibrate Now.

Get to Know

• Flashing blue: Waiting to be registered
• Flashing white: Vibrating for alarm
• Flashing blue & white: Lost internet connection

Set Up VibroSaver Cloud

• VibroSaver Cloud is a VibroSaver service platform on the internet. You can access
• VibroSaver anywhere anytime through the app on your smart device.

1. Get the VibroSaver app

• Download and install the VibroSaver app from the App Store for your
• Apple devise or the Google Play Store for your Android device.

1. Sign up for the VibroSaver service

• Open the VibroSaver app and registerVibroSaver account.

1. Tap Register.
2. Choose Email or Mobile for your desired user account type and tap Obtain verification code. Set Up VibroSaverC/oud (Cont’d)
3. Enter the received verification code.

• * The verification code will be received in the inbox of your email or text message.

1. Set the password for your VibroSaver account.

• Password must contain
  • 6-20 characters, including alphabets and numbers.

1. Set Up VibroSaver

Please go through the instructions on pages 5 through 7 to set up the VibroSaver.

• Prerequisites
• Mobile device (iPhone/iPad or Android smartphone/tablet)
• 2.4GHz Wi-Fi network with stable internet connection
• What is 2.4GHz Wi-Fi
• VibroSaver works on the 2.4GHz band while most home Wi-Fi supports dual bands (2.4GHz and 5GHz). They may have been set up with the same Wi-Fi name or different names.
• If your home Wi-Fi has different names for each band, please make sure your mobile device is connected to a Wi-Fi network without any notation on 5GHz in its name such as ‘5; ‘5G’ or ‘5GHz’. Go to Settings > Wi-Fi on your mobile device and check if your mobile device is connected to 2.4GHz Wi-Fi.
• Your mobile device running the VibroSaver app should be attached to the same
• Wi-Fi network with the VibroSaver device during the setup process.

1. Power up the VibroSaver device

• Connect the VibroSaver to the nearby outlet.
• Once powered up, it will vibrate once and flash a blue LED.
• If the VibroSaver does not flash a blue LED, hold down the reset button for 5 seconds using a pin until the red LED blinks. (Go to page 7 7 to learn about how to reset)
• In the VibroSaver app

1. Tap Add VibroSaver.

2. See the on-screen instructions and tap Next.
   

3. Select Wi-Fi and enter the Wi-Fi password. Tap Confirm.

4. Wi-Fi name

5. Wi-Fi password
   Wi-Fi name and password are case sensitive.

6. Change Wi-Fi network
   Tap Change Network to select other Wi-Fi networks. Go to page 5 0 for further information.

7. VibroSaver device will be scanned and set up.

• Set VibroSaver name and tap Completed.
• Now you’re ready to set up alarms on VibroSaver.

Set Up Alarms

Once VibroSaver is added to your account, you can set alarms on the app.

1. Select your VibroSaver to set up alarms.
2. Tap Add Alarm.
3. Set your alarm options and tap Done.
4. Set alarm time
5. Set alarm label
6. Set a repeat option to repeat the alarm the next day.
7. Set vibration strength Choose vibration strengths from Normal and Strong.
8. Test VibroSaver Check the selected vibration strength.

You can create multiple alarms up to 10.

Snooze/Stop Alarms

When the alarm goes off, VibroSaver will start to vibrate and flash a white LED. Snoozing will delay an alarm for 9 minutes (can be reused for up to 1 hour).

In the VibroSaver app

1. Select your VibroSaver.
2. Tap Snooze or Stop in the alarm popup.
3. Using the voice service

• Connect VibroSaver with your Alexa or Google Assistant device.  (Go to page 14 for further information)
• When an alarm goes off, say”Turn off VibroSaver”to snooze the alarm.
• When the alarm is snoozed, say “Turn off VibroSaver” again to stop the alarm.

1. Turn On/Off VibroSaver

VibroSaver provides switches to enable or disable its alarm functions. You can turn on or off the VibroSaver using a physical switch on the device or a software switch in the app. Alarm functions will be disabled if either of the switches is turned off except for receiving VibrateNow.

1. On the VibroSaver device (physical switch)

• Alarm functions are disabled except Vibrate Now.
• Alarm functions are enabled and will be confirmed with a short vibration.

1. In the VibroSaver app (software switch)

Alarm functions are enabled.
Alarm functions are disabled.
The software switch needs to be turned on to send Vibrate Now.

1. Using the voice control (software switch)
2. Connect VibroSaver with your Alexa or Google Assistant device. (Go to page 14 for further information)
3. While no alarm goes off nor is snoozed, you can turn on or offVibroSaver software switch using your Alexa or Google Assistant devices.
4. VibroSaver will vibrate once to confirm the software switch is turned on if you have at least one alarm set up and it is enabled.

Manage VibroSaver

By deleting or resetting VibroSaver, all alarms will be erased. After then, go through Add VibroSaver to add it to your app again or to register to another account (See ‘2. Set Up VibroSaver’ on page 5).

Delete VibroSaver You can delete VibroSaver from your app.

1. Select your VibroSaver.
2. Tap … to open About VibroSaver.
3. Scroll down to the bottom and tap Delete VibroSaver.

• Reset VibroSaver

You can initialize the VibroSaver device by holding down the reset button for 5 seconds until the red LED blinks. Afterward, VibroSaver will flash blue LED only and can be set up for the new user.

• Change Wi-Fi network
• When Wi-Fi network information (Wi-Fi name or password) is changed, VibroSaver will flash blue and white LED in turn. To change the Wi-Fi network, press and hold the Snooze button for 10 seconds until it vibrates once and flashes Blue LED.
• By changing the Wi-Fi network, VibroSaver will reset and erase alarms.

Share VibroSaver

Your VibroSaver can be shared with others. Shared VibroSaver users also can set alarms, turn on/offVibroSaver or send a Vibrate Now. Connect with your family or friends so you can give or get help from them. Please make sure you can share the VibroSaver only with the registered VibroSaver user.

1. Add sharing
2. Select your VibroSaver.
3. Tap … to open About VibroSaver.
4. On the menu, tap Share VibroSaver.
5. Tap Add Sharing.
6. Enter the user account and tap Done at the bottom of the screen.
7. Shared VibroSaver will appear on the list
8. Stop sharing

• To stop sharing sent to
• Tap VibroSaver on the list
• Tap
• Tap Share VibroSaver under Others Swipe left the user to stop sharing
• Tap Delete
• To stop sharing received from
• Tap VibroSaver on the Shared VibroSavers list
• Tap
• Tap Remove Sharing

Vibrate Now

At times you want to reach out to your family or friends for urgent purposes but they don’t take a call because they can’t hear the ringtone while in sleep. Send a Vibrate Now to wake them up so they respond to you right away. To accommodate your emergency needs, VibroSaver will vibrate at the STRONG level for the Vibrate Now even when the physical switch is turned off on the device.

1. Send a Vibrate Now
   Tap the Vibrate Now button to activate instant vibration.
   

2. Stop vibrating

• Tap the Vibrate Now button again in the app to stop vibrating.
• Vibration can be dismissed on the device also by pressing and holding the Snooze button for 5 seconds. Sliding the on/off switch to OFF will stop vibrating too.
• To use a voice, say”Turn offVibroSaver” on your Alexa or Google Home device.
• When a Vibrate Now is received, a notification with a timestamp will be received on your phone. Go to Settings> Message on yourVibroSaver app to see the history.

Use Voice Control

If you’re using Alexa or Google Assistant, you can add VibroSaver as a smart home device and use your voice to turn on/offVibroSaver alarm function, and also snooze or stop the alarm (See pages 9 and 10 for further information).

1. Before you begin

Prepare yourVibroSaver account information (phone number/email address and password). You will need to link your VibroSaver account to Alexa or Google Assistant during the setup process.  Alexa or Google Assistant app UI and device setup procedure are kept updated. Refer to the latest device setup guide for each voice service you use.
You can also get help in the VibroSaver app, go to Settings> Works with and tap Alexa or Google Assistant.

Set up for Alexa

1. Visit our website for detailed guidance. iluv.com/vibrosaver/Alexa
2. Install the Alexa app on your mobile device and set it up to use with your Echo device.
3. Then install the VibroSaver skill and link the VibroSaver account to Alexa.
4. If you already added yourVibroSaver in the VibroSaver app, you can add
5. VibroSaver to Alexa either by running Discover Devices on the Alexa app or saying  Discover VibroSaver” on the Echo device
6. If you don’t have a registered VibroSaver in yourVibroSaver app, yourVibroSaver will be automatically added to Alexa when you add it in the VibroSaver app.

Set up for Google Home/ Assistant

Visit our website for a detailed guide. iluv.com/vibrosaver/googlehome

1. Prior to using Google Home/ Assistant, add your VibroSaver in the VibroSaver app.
2. You need either a Google Home speaker, an Android 6.0+ mobile device, or Google Home or Google Assistant app running on an iOS 1 O+ device.
3. Link your VibroSaver account with Google Home or Google Assistant. VibroSaver will have automatically appeared on your Google Home or Google Assistant app and you will be able to ask on your Google Home devices.

• What you can ask is Go to pages 9 and 70 for further information.

Tips and Troubleshooting

1. How can I select 2.4GHz Wi-Fi while setting up the VibroSaver?

If your phone was connecting to the SGHzWi-Fi network, please change it to the 2.4 GHz band during the setup.

1. In the VibroSaver app, tap Change Network to go to the Wi-Fi settings menu of your mobile device.
2. Select your Wi-Fi network without S(GHz) in its name and connect to it.
3. To go back to VibroSaver app, on the iOS device tap
4. VibroSaver at the top left corner of the screen and on an Android device tap the Back button of your device.

• contact your internet service provider if you need further assistance on your home Wi-Fi device, network settings, and password.

1. Can I change the Wi-Fi network of my phone after finishing setting up the VibroSaver
   Yes. Once the VibroSaver device is successfully connected to Wi-Fi and registered to your account, you can change Wi-Fi on your mobile device or you can also use cellular connection.

2. My VibroSaver is not found when I tried ‘Add VibroSaver
   Please make sure if your VibroSaver is flashing blue LED. If it’s not, reset the VibroSaver refering to Reset VibroSaver at page 11. And also check if your Wi-Fi router is connected to the internet. Then retry Add VibroSaver. If your VibroSaver is left more than one hour with flashing blue LED, try again after powering it off and on.

3. My VibroSaver shows offline on the app. What should I check

• lf you don’t see any LED is lighted on, check if yourVibroSaver device is connected to the power. Slide on/off switch from off to on. If you feel strong vibration, power is not the issue.

• lf yourVibroSaver flashes blue and white LED:

• check if yourWi-Fi router is getting stable internet connection.

• in case your Wi-Fi settings are changed, update your VibroSaver referring to
  Change Wi-Fi network at page 11.

• What is the compliant USB power adapter

You can use 5V/2A adapter. Low current USB adapter such as SV/1 A is not enough to operate the VibroSaver.

WARNING:
STRANGULATION HAZARD!

• Keep cords out of the reach of children (more than 3 feet away). Do not use with an extension cord.
• Important Product Information
• Please visit iluv.com/vibrosaver/information for legal and compliance information such as safety, compliance, and recycling ofVibroSaver.

WARNING

RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

AVERTISSEMENT

RISQUE DE STRANGULATION

• Garder le cordon hors de portee desenfants (a plus de 1 m de distance). Ne pas utiliser avec une rallonge.

lmportantes informations de produit Veuillez consulter iluv.com/vibrosaver/information pour toutes les informations de conformite juridique tel le la securite, la conformite et le recyclage de VibroSaver. WEEE (Waste Electrical & Electronic Equipment/
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business user should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

VibroSaver Customer Service

Online: iluv.com/vibrosaver/support

Email:[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>