PowerA 1518375-01 Play and Charge Kit User Manual

June 15, 2024
PowerA

PLAY AND
CHARGE KIT
USER MANUAL
PowerA 1518375 01 Play and Charge Kit -

CONTENTS:

  • (2) 1100 mAh NiMH Rechargeable Batteries
  • Charge-through battery doors: (2) “”A”” for Xbox One and (2) “”B”” for Xbox Series X|S
  • 10 ft (3m) USB-C-Charging Cable
  • User Manual

USE:

  1.  Install the Ni-MH Battery into the battery compartment of your Xbox Wireless Controller.
  2. Attach the correct Charge-thru Battery Door to the back of the Xbox Wireless Controller after checking underside of door: ‘A’ for Xbox One and ‘B’ for Xbox Series X|S.
  3. Connect USB-C to battery and the Xbox.
  4. Check LED color for charge status: Amber while charging and White once fully charged.
  5. The Charge-Thru Battery Door also allows your controller to be charged on the PowerA Charging Stand or Charging Station
    NOTE: For battery charge level, check Xbox on-screen display. Battery can also be charged when not installed to controller. Controller remains functional when charging while battery is installed.

CHARGING:

  • Only use the included USB-C Charging Cable to connect to Xbox Console.
  •  Do not connect USB-C Charge Cable to any USB-C AC adapters.
  •  Do not charge your 1100 mAh Rechargeable Batteries on flammable surfaces or materials (e.g., mattresses, couches, or newspapers).
  • Do not leave batteries charging unattended for periods longer than the normal charging time. Unplug batteries or charging device when batteries are fully charged to prevent batteries overheating.
  •  Ensure your controller or batteries have proper ventilation while charging. Do not cover controller while charging.

WARNING – BATTERY LEAKAGE

  • Leakage of chemicals contained within the battery pack can cause personal injury as well as damage to game controller.
  • Avoid allowing battery chemicals to contact skin. If contact occurs, immediately wash thoroughly with soap and water.
  • If liquid leaking from a battery pack comes into contacwith your eyes, DO NOT RUB EYES! Immediately flush eyes thoroughly with clean running water and seek medical attention to prevent injury to eyes.

BATTERY WARNING:

  • Do not attempt to repair the Ni-MH battery yourself—you may damage the battery, which could cause overheating, fire, and injury.
  • The NI-MH battery in your device should be serviced or recycled by PowerA or an authorized provider and must be recycled or disposed of separately from household waste.
  • Dispose of batteries according to your local environmental laws and guidelines.
  • Do not use or leave a device containing rechargeable batteries in a high-temperature environment (e.g., in strong direct sunlight, or in a vehicle in hot weather). High temperatures may cause batteries to overheat or catch fire, and the battery performance or longevity may be negatively affected.
  • Do not use a device containing rechargeable batteries in an environment with high levels of static electricity. Excessive static electricity can impair the batteries’ internal safety measures, increasing the risk of overheating or fire.
  • If the battery gives off an odor, generates heat, or in any way appears abnormal during use, recharging or storage, immediately remove it from any charging device and place it in a sealed fireproof container such as a metal box, or in a safe location away from people and flammable items.
  • Discarded batteries may cause fire. Do not heat the controller or battery, or place either in or near fire.

TROUBLESHOOTING

Q1: The Play and Charge Kit Rechargeable Battery is not charging.
A1: The Ni-MH Battery needs a powered USB-C source to charge. Confirm that your Xbox is powered ON.
A2: Confirm the USB-C Charge Cable is connected to the Ni-MH Battery and the Xbox correctly.
A3: Confirm the Ni-MH Battery and Charge-thru Battery Door is installed correctly.
Q2: The Play and Charge Kit Ni-MH Battery is not charging on the PowerA Charging Stand or Charging Station.
A1: Confirm the Xbox Wireless Controller is securely placed in the proper position of the Charging Stand orDual Charging Station. Consult the User Manual for proper controller placement.
A2: If using the PowerA Charging Stand, confirm it is properly connected to a powered USB-C port.
A3: If using the PowerA Dual Charging Station, confirm it is properly connected to a powered AC wall outlet.

CONTACT / SUPPORT
For support with your PowerA accessories, please visit PowerA.com/Support.
WARRANTY
2-Year Limited Warranty. Visit PowerA.com/Support for details.
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each symbol name.
Waste Electrical and Electronic Equipment (WEEE): Electrical and electronic devices andbatteries contain materials and substances that can have damaging effects on human health and the environment. This symbol indicates that this device and the battery musnot be treated as household waste and must be collected separately. Dispose of the device via a collection point for the recycling of wasteelectrical and electronic equipment within the EU, UK and in other European countries that operate separate collection systems for waste electrical and electronic equipment and batteries. By disposing of the device and the battery in the proper manner, you help to avoid possible hazards for the environment anpublic health that could otherwise be caused by improper treatment of waste equipment. The recycling of materials contributes to the conservation of natural resources.
CE (Conformité Européene aka European Conformity) is a certification mark that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.
UK Conformity Assessment (UKCA): A declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.
**** The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).

PLAY & CHARGE KIT

INPUT VOLTAGE (X, V)| 5 V MAX
INPUT CURRENT (X.X, A)| 0.5 A MAX
OUTPUT VOLTAGE (X.X, V)| 5 V MAX
OUTPUT CURRENT  (X.X, A)| 0.5 A MAX

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada Iicense exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.

WARRANTY AGAINST DEFECTS,
AUSTRALIA AND NEW ZEALAND CUSTOMERS
This product is provided with a 2-year warranty against defects in manufacturing or materials from the date of purchase. ACCO Brands will either repair or replace a faulty or defective product subject to the conditions of this warranty. Claims under this warranty must be made to the place of purchase within the warranty period with proof of purchase by the original purchaser only. Expenses associated with a warranty claim are the responsibility of the consumer. Conditions of this warranty are on our website: PowerA.com/warranty-ANZ This warranty is provided in addition to other rights or remedies available to you under the law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

TWO-YEAR LIMITED WARRANTY
For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.

Customer Service

PowerA.com/Support

DISTRIBUTOR CONTACT DETAILS
AUSTRALIAN CUSTOMERS
ACCO Brands Australia Pty Ltd
Locked Bag 50, Blacktown BC, NSW 2148
Phone: 1300 278 546 | Email: [email protected]
NEW ZEALAND CUSTOMERS
ACCO Brands New Zealand Limited
PO Box 11-677, Ellerslie, Auckland 1542
Phone: 0800 800 526 | Email: [email protected]

MANUFACTURED FOR:
ACCO Brands USA LLC,
4 Corporate Drive, Lake Zurich, IL 60047
ACCOBRANDS.COM | POWERA.COM | MADE IN CHINA
ADDITIONAL LEGAL
©2023 ACCO Brands. All Rights Reserved. PowerA and PowerA Logo are trademarks of ACCO Brands. Microsoft,  Xbox, Xbox “Sphere” Design, Xbox Series X|S, and Xbox Oneare trademarks of the Microsoft group of companies. All other trademarks are the property of their respective owners.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

PowerA User Manuals

Related Manuals