iLuv TB150 Wireless Earbuds User Manual
- June 5, 2024
- iLuv
Table of Contents
Wireless Earbuds
User Manual
PRODUCT OVERVIEW
HOW TO PAIR
Take both earbuds out of the charging case to pair to your device; the earbuds will automa cally power on. With the earbuds powered on, go to your Bluetooth setting on your audio device and select ‘iLuv TB150’. Once paired you’re good to go!
Take earbuds out of the charging case| Go to the Bluetooth settings on the audio device| Select iLuv TB150 in the Bluetooth setting
HOW TO WEAR
Both earbuds are marked with an L or R to indicate the appropriate ear The earbuds are differently angled to fit either the le or the right ear The proper fit will ensure the best ound quality. Insert the earbud in your ear and rotate slightly clockwise (as shown in the image below).
HOW TO FIT
Select the desired ear tip size (x-small, small, medium, large) and place it onto the earbud. Once selected, firmly push the earbud onto the earbud. There should be no gap between the ear tip and earbud. The medium size eartips are premounted onto the earbuds.
BATTERY PLAYTIME
The TB150 earbuds will provide a playtime of 20 hours. Get up to 7 hours on a single charge and an additional 12 hours from the included charging case. For a quick charge, lace both earbuds back into the charging case for 20 minutes and get 2 hours of listening to me. A full charge for the earbud and charging case will take 2 hours.
BATTERY STATUS
The charging case is equipped with LED battery life indicators which help
identify the battery level. The LED will stay lit when charging is at full
capacity. Barry level ercentages listed below:
HOW TO CHARGE
Please follow the instructions below to properly charge the earbuds and charging case. The LEDs on the earbud and charging case will signify the status of charge; the earbud EDs will be off when fully charged while the charging case LEDs will all be lit.
Earbuds
Place both earbuds into the charging case and close the case lid| Charging
Case
Plug the Type-C USB cable to the charging case and a power adapter
TOUCH CONTROLS
POWER
Please follow the instructions below.
PRESS & HOLD 2 SECONDS LEFT & RIGHT| PRESS & HOLD 5 SECONDS LEFT OR RIGHT
MUSIC
Please follow the instructions below
SINGLE TAP LEFT OR RIGHT| DOUBLE TAP LEFT OR RIGHT
VOLUME
Please follow the instructions below
PRESS & HOLD RIGHT| PRESS & HOLD LEFT
CALLS
Please follow the instructions below.
DOUBLE TAP LEFT OR RIGHT| PRESS & HOLD 2 SECONDS LEFT OR RIGHT
VOICE ASSISTANT
Availability of Google Assistant voice control feature will vary by different
Android Phone models.
TRIPLE TAP LEFT OR RIGHT
WATER RESISTANCE
The earbuds are rated IPX6 water resistant. They are designed to be sweat and
weather resistant but aren’t meant to be submerged under water. The IPX6 is
not a permanent condition and the resistance may decrease as a result of
normal wear.
CAUTION
Please do NOT do the following:
Swim or shower with earbuds| Submerge earbuds underwater| Place wet earbuds into the charging case
REPLACEMENT PARTS
Replacement or additional accessories can be purchased online at:
- Luv Website: www.iLuv.com
- Luv Amazon Storefront: www.Amazon.com/iLuv
SPECIFICATIONS
Bluetooth Version | 5.1 |
---|---|
Bluetooth Range | 10 meters (30 feet) |
Battery Composition | Lithium-ion |
Play Time | 7 hours* |
Charge Time | 2 hours |
Quick Charge | 20 minutes = 2 hours of playtime |
Charging Method | Type-C USB |
Waterproof Protection | IPX6 |
Microphone Type | MEMS |
Microphone Technology | Omnidirectional |
Connection Type | Independent |
Earbud Dimensions | 23.4 (W) x 23 (D) x 30 (H) mm |
Case Dimensions | 68.5 (W) x 35 (D) x 30 (H) mm |
Earbud Weight | 4.3 grams |
Case Weight | 32.1 grams |
*Playme and standby me may vary due to usage conditions
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residenal installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separaon between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modificaons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Hereby, iLuv Creave Technology declares that the radio equipment type TB150 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.iluv.com.
Printed in China
Documents / Resources
| iLuv
TB150 Wireless
Earbuds
[pdf] User Manual
TB150, ATL-TB150, ATLTB150, Wireless Earbuds, TB150 Wireless Earbuds,
Bluetooth Earbuds, Earbuds
---|---