iLuv TB100 Wireless Earbuds User Manual
- June 5, 2024
- iLuv
Table of Contents
TB100 TB100
USER MANUAL (Ver 3.0)
PRODUCT OVERVIEW
HOW TO PAIR
Take both ear buds out of the charging case to pair to your device; the ear buds will automatically power on. With the ear buds powered on, go to your Bluetooth setting on your audio device and select ‘iLuv TB100’. Once paired you’re good to go!
Take ear buds out of charging case
Go to Bluetooth setting on audio device
Select iLuv TB100 in Bluetooth setting
HOW TO WEAR
Both ear buds are marked with a L or R to indicate the appropriate ear The ear buds are differently angled to fit either the left or the right ear The proper fit will ensure the best sound quality. Insert the ear bud in your ear and rotate slightly clockwise (as shown in image below).
Insert ear bud into ear canal
Slightly rotate ear bud in ear canal
HOW TO FIT
Select the desired ear tip size (x-small, small, medium, large) and place it onto the ear bud. Once selected, firmly push the ear tip onto the ear bud. There should be no gap in between the ear tip and ear bud. The medium size ear tips are pre mounted onto the ear buds.
Place ear tips onto the ear bud
Firmly push ear tip onto the ear bud
BATTERY PLAYTIME
The TB100 ear buds will provide a playtime of 20 hours. Get up to 8 hours on a single charge and an additional 12 hours from the included charging case. For quick charge, place both ear buds back into the charging case for 20 minutes and get 2 hours of listening time. A full charge for the ear bud and charging case will take 2 hours.
Single Charge
Total Charge with Case
Rapid Charge 20 mins
Playtime measured on a single charge at an 80% volume level
BATTERY STATUS
The charging case is equipped with LED battery life indicators which helps identify the battery level. The LED will stay lit when charging is at full capacity. Battery level percentages listed below:
HOW TO CHARGE
Please follow the instructions below to properly charge the ear buds and charging case. The LEDs on the ear bud and charging case will signify the status of charge; the ear bud LEDs will be off when fully charged while the charging case LEDs will all be lit.
Ear buds
Place both ear buds into the charging case and close the case lid
Charging Case
Plug the Type-C USB cable to the charging case and a power adapter
TOUCH CONTROLS POWER
Please follow the instructions below
On
PRESS & HOLD 2 SECONDS LEFT & RIGHT
Off
PRESS & HOLD 5 SECONDS LEFT OR RIGHT
TOUCH CONTROLS MUSIC
Please follow the instructions below
PLAY/PAUSE
SINGLE TAP LEFT OR RIGHT
SKIP
DOUBLE TAP LEFT OR RIGHT
TOUCH CONTROLS VOLUME
Please follow the instructions below
INCREASE
PRESS & HOLD RIGHT
DECREASE
PRESS & HOLD LEFT
TOUCH CONTROLS CALLS
Please follow the instructions below
ANSWER/END
DOUBLE TAP
LEFT OR RIGHT
REJECT
PRESS & HOLD 2 SECONDS LEFT OR RIGHT
TOUCH CONTROLS VOICE ASSISTANT
Availability of Google Assistant voice control feature will vary by different Android Phone models.
ACTIVATE ASSISTANT
TRIPLE TAP LEFT OR RIGHT
WATER RESISTANCE
The ear buds are rated IPX6 water resistant. They are designed to be sweat and weather resistant but aren’t meant to be suberged under water. The IPX6 is not a permanent condition and the resistance may decrease as a result of normal wear.
CAUTION
Please do NOT do the following:
Swim or shower with ear buds
Submerge ear buds under water
Place wet ear buds into charging case
REPLACEMENT PARTS
Replacement or additional accessories can be purchased online at:
- iLuv Website: www.iLuv.com
- iLuv Amazon Storefront: www.Amazon.com/iLuv
Left & Right Ear bud
Charging Case
Ear tips
SPECIFICATIONS
Bluetooth Version 5.3
Bluetooth Range 10 meters
(30 feet)
Battery Composition Lithium-ion
Play Time 8
hours*
Charge Time 2 hours
Quick Charge 20
minutes = 2 hours play time
Charging Method Type-C USB
Waterproof Protection IPX6
Microphone Type MEMS
Microphone Technology Omnidirectional
Connection Type
Independent
Ear bud Dimensions 27.5 (W) x
18 (D) x 24 (H) mm
Case Dimensions 67.4 (W) x
30.5 (D) x 31 (H) mm
Ear bud Weight 4.6 grams
Case Weight 32.7
grams
Playtime and standby time may vary due to usage conditions
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the use is encouraged to try to correct the interference by one or more of
the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
FCC ID: ATL-TB100-V3
Hereby, iLuv Creative Technology declares that the radio equipment type TB100 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.iluv.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>