LINDY 42680 50m USB 2.0 Cat.6 Extender User Manual
- June 13, 2024
- LINDY
Table of Contents
LINDY 42680 50m USB 2.0 Cat.6 Extender User Manual
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this document with the product.
Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it is firmly secured in place and does not detach by pulling before installing into a power socket. To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources.
- Always place it in a well-ventilated place. Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
Attach the required adapter to the plug. Push the adapter firmly, twist until the latch secures the adapter. To remove, push the button and twist in the opposite direction.
Introduction
Thank you for purchasing the Lindy USB 2.0 Cat.6 Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
This USB 2.0 Cat.6 Extender 50m is composed of a transmitting and a receiving unit with 1 USB port which enables a USB host device to send data up to 50 metres over low cost network cable. The receiver is powered over the network cable which means that when the included power supply is connected to the transmitter, no power supply is required for the receiver, allowing for a discreet installation.
Package Contents
• Transmitter Unit
• Receiver Unit
• USB 2.0 A/B male cable (approximately 50cm)
• Multi-Country Power Supply, 24V 0.5A
• LINDY Manual
Features
• Supports USB 2.0 (high-speed) and USB 1.1 (full-speed, low-speed) devices
• Supports distances up to 50 meters using Cat.5e/6 (or better) UTP/STP cables
• True plug and play without any driver installation
• Supports all major Operating Systems with USB support
• Transmitter and Receiver units both feature integrated mounting brackets
Specification
- Transmitter: Input Ports: 1 x USB 2.0 Type B, DC Socket for PSU (3.5/1.35mm) Output Port: 1 x RJ45
- Receiver: Input Port: 1 x RJ45, Output Port: 1 x USB 2.0 Type A
- Dimensions: 60x67x23mm (2.36×2.64×0.91in) (each unit)
- Weight: 91g/0.2lb (each unit)
- Operating Temperature: 0° – 70°C (32°F – 158°F)
- Storage Temperature: -20°- 80°C (-4°F – 176°F)
- Humidity: 0 – 90% RH (non-condensing)
Installation
- Connect the transmitter to an available USB port on the host computer by using the included USB cable.
- Connect the power adapter to the transmitter unit.
- Place the receiver unit near the USB device in the desired remote location.
- Connect the transmitter to the receiver unit by using a Cat.5e/6 (or better) cable (not included!).
Three LEDs on the receiver unit indicate (from top to bottom): power (red), link (green) and activity (yellow).
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. You are cautioned that changes or modification not
expressly approved by the party responsible for compliance could void your
authority to operate the equipment. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com,
T: +49 (0)621 470050
Manufacturer (UK) :
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk,
T: +44 (0)1642 754000
Tested to comply with FCC standards.
For home and office use.
No. 42680
4th Edition, June 2023
lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>