Quiet 4U Rackmount Chassis ACP-4000 Specifications
- June 7, 2024
- Quiet
Table of Contents
Quiet 4U Rackmount Chassis ACP-4000 Specifications
Quiet 4U Rackmount Chassis with Visual & Audible Alarm Notification
Features
- Supports either an ATX motherboard or PICMG backplane with up to 15 slots
- Shock-resistant disk drive bay design holds up to three 5.25″ and one 3.5″ disk drives
- LED indicators and alarm notification for system fault detection
- Low noise PWM controlled system fans
- Built-in Intelligent System Module enables whole system fan control and remote manageability
Specifications
Drive Bay
| 3.5″ 3.5″| External 1 5.25″ 3
---|---|---
Cooling
| Fan Air Filter| 2 (12 cm PWM / 82 CFM each) Yes
Front I/O Interface
| USB 2.0 PS/2| 21
Miscellaneous
| LED Indicators
Rear Panel| Power, HDD, temperature, fan, and power voltage status
Backplane version: One 9-pin D-Sub opening Motherboard version: Five 9-pin
D-Sub & one 25-pin D-Sub openings
Intelligent System Module Hardware Monitoring
| CPU/System fan speed , CPU/System temperature (Only Advantech AIMB-78X, PCE-51XX/71XX mainboards can enable CPU fan speed and temperature monitoring function of Intelligent System Module)
Environment
| Temperature
HumidityVibration (5 ~ 500 Hz)| Operating
0 ~ 40 °C (32 ~ 104 °F) 10 ~ 85% @ 40 °C, non-condensing
1 Grms| Non-Operating
-20 ~ 60 °C (-4 ~ 140 °F) 10 ~ 95% @ 40 °C, non-condensing2 G
Physical Characteristics
| Dimensions (W x H x D) Weight| 482 x 177 x 479 mm (19″ x 7″ x 18.9″) 15.2 kg (33.5 lb)
Front View
Dimensions
Ordering Information
Part Number
| Power supply| Power supply type| Wattage| 80 plus grade| Switch type
---|---|---|---|---|---
Backplane Version| |
| | |
ACP-4000BP-30F
| PS8-300ATX-ZBE| Single| 300W| Bronze| ATX
ACP-4000BP-50F| PS8-500ATX-BB| Single| 500W| Bronze|
ATX
Motherboard Version
ACP-4000MB-30F
| PS8-300ATX-ZBE| Single| 300W| Bronze| ATX
ACP-4000MB-50F| PS8-500ATX-BB| Single| 500W| Bronze|
ATX
Packing List
| Part number | Description | Quantity |
|---|---|---|
| ACP-4000 | 4U chassis with handle set | 1 |
| 1750008561-01 | system fan | 2 |
| 1700030260-01 | system fan cable ( MB version) | 2 |
| 1700029691-01 | system fan cable ( BP version ) | 2 |
| 2130006147S000 D | Door filter 97.6 x 36.6 x 5 mm | 2 |
| 2130004803S000 | Fan filter 115 x 195 x 5 mm | 1 |
| 1960002462 | key set | 1 |
Content of Accessory Box
98R24000000| Handle set| 1
| 1 Screws/nuts and rubber for motherboard and devices| One bag
2002061063| User manual| 1
Optional Accessories
Part number
|
Description
---|---
IPC-DT-5230E
| Mobile rack for converting dual 5.25″ drive bays to three 3.5″ SATA HDD trays
1700029268-01
| Power cable for GPU card (Two 4-pin 12V connectors to one 6+2 pins PCIe power connector)
1700024754-01
| Power cable for GPU card (Two B4P Molex connectors to one 6+2 pins PCIe power connector)
- If GPU card with 2 power connectors, please use 1700029268-011 + 1700024754-011; If GPU card with 1 power connector, please use 1700029268-01.
- Only 500W or higher wattage PSU support 1700029268-01 and 1700024754-01 for high-end GPU card.