bE quiEt BL115 Silent Wings 4 12cm PWM High Speed Case Fan Instruction Manual

bE quiEt BL115 Silent Wings 4 12cm PWM High Speed Case Fan

Product Information

Specifications

• Brand: Be Quiet!
• Model: BL115 Silent Wings
• Type: Anti-Vibration Fittings
• Material: Rubber and Hard Plastic
• Warranty: Limited Warranty as specified below

Product Usage Instructions

Installation of Hard Plastic Fittings

1. Clip the hard plastic elements from above onto the fitting lock.
2. Stecken Sie das Kunststoff-Element von oben auf den Steckverschluss.

Installation of Anti-Vibration Fittings

1. The rubber elements as well as the fitting locks are engraved on the inside.
2. Follow the instructions on page 1 to remove the anti-vibration fittings.

WARNING: Do not touch the fan during operation!

Warranty Information
Per the terms and conditions of this limited warranty, Be Quiet! warrants its new products to be free of defects resulting from faulty materials and manufacturing for the length of the warranty period.

FAQ

• Q: What does the warranty cover?
  A: The warranty covers defects resulting from faulty materials and manufacturing for the specified warranty period.

• Q: How do I claim warranty service?
  A: Proof of purchase is required for warranty service. Contact Be Quiet! customer support for assistance with warranty claims.

• Q: Are modifications covered under warranty?
  A: Any product that has been modified without permission from Be Quiet! is not covered under the warranty.

INSTALLATION

Installation of the hard plastic fittings

• Clip the hard plastic elements from above onto the fitting lock.

  • To remove the hard plastic elements, press down the latching lugs on the right and left side to remove the hard plastic elements. Then pull the mounting element upwards.
    To remove the anti-vibration fittings follow the instructions.

• Screw down the fan using the included screws.

Installation of the anti-vibration fittings

• The rubber elements as well as the fitting locks are engraved on the inside.
  • When positioned towards “L” there is 1mm gap between the housing and the fan frame, resulting in the maximum possible decoupling.
  • When you position the rubber elements towards “S” they fit flush with the housing.
• The fan is then mounted into place using the washers and push-pins.
  WARNING: Do not touch the fan during operation!

Limited Warranty

Per the terms and conditions of this limited warranty as given below, be quiet! warrants its new products to be free of defects resulting from faulty materials and faulty manufacturing for the length of the warranty period.

APPLICABILITY
This non-transferable warranty applies to newly purchased, previously unopened be quiet! products and is enforceable by only the original consumer purchaser. Proof of purchase is required for warranty service, so should be retained. be quiet! does not provide warranty registration services.

WARRANTY PERIOD
For eligible products, parts and labor are warranted for the applicable warranty period from the date of purchase. The applicable warranty period varies by product model, and is identified in your user documentation, on the product package, or as listed below. Should any of these warranty periods differ, the longest specified warranty period will apply. Replaced products will be warranted for the remainder of the original warranty period or thirty days, whichever is longer.

EXCLUSIONS
The following are not covered by the warranty:

1. Normal wear and tear.
2. Any product which has been modified without permission from be quiet!, or on which the serial number or warranty sticker has been defaced, modified, or removed.
3. Damage, deterioration or malfunction resulting from:
   • Accident, abuse, misuse or improper use, neglect, connection to an improper voltage source, unauthorized product modification, or failure to follow instructions included with the product.
   • Fire, water, lightning, or other acts of nature.
   • Repair or attempted repair by anyone not authorized by be quiet!
   • Shipping or transport damage (claims must be made with the carrier).
   • Any other cause which does not relate to a defect in materials or manufacturing workmanship.
4. Cartons, cases, batteries, cabinets, tapes, accessories or other consumables used with this product.
5. be quiet!, Inc. does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose.
6. Removal or installation charges.
7. Shipping charges.
8. Any incidental charges.

EXCLUSION OF DAMAGES
be quiet!‘s sole obligation and liability under this warranty is limited to the repair or replacement of a defective product at its option. be quiet! shall not, in any event, be liable for any special, incidental, indirect, or consequential damages whatsoever, including but not limited to loss of profits, revenue, or data (whether direct or indirect), damages resulting from interruption of service and loss of business, or for liability in tort relating to this product or resulting from its use or possession, even if be quiet! has been advised previously of the possibility of such damages.

LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph II.

LOCAL LAW AND YOUR WARRANTY
This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.

NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make any modification, extension, or addition to this warranty.

TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the Online Support section at www.bequiet.com for details and contact information. You will need to provide proof of purchase for warranty service.

years manufacturer guarantee for consumers (original purchase from authorised be quiet! dealers only). Guarantee work can only be processed with an included copy of the purchase receipt from an authorised be quiet! dealer. Manipulation of any kind, structural changes of any kind as well as damages through external mechanical forces lead to a complete voiding of the guarantee. Our General Warranty Conditions apply, which can be viewed on the Internet on www.bequiet.com.
Listan GmbH. Wilhelm-Bergner-Straße 11c . 21509 Glinde . Germany
For further information, you can contact us via e-mail: service@bequiet.com

www.bequiet.com/bl117

bequiet.com

References

• be quiet! - Silent PSUs, cases and PC cooling products. PSU calculator and cooler check for your PC
• be quiet! - Silent PSUs, cases and PC cooling products. PSU calculator and cooler check for your PC
• von be quiet!
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>