be quiet Pure Base 600 Window Orange Silent Essential PC Cases User Manual

: June 4, 2024
: be quiet

be quiet Pure Base 600 Window Orange Silent Essential PC Cases

be-quiet-Pure-Base-600-Window-Orange-Silent-Essential-PC-Cases-product-
image

INTRODUCTION

We are delighted you have chosen to buy our Dark Base PC case. Please read the information here and carefully follow all the instructions prior to installation. Should you have further questions, please contact our customer service. See contact information in the manufacturer’s details section.

Warranty

3-year manufacturer’s warranty for the consumer (original purchase from authorized be quiet! dealers only)
Your original receipt of purchase will be required before warranty services are rendered. Please store it carefully.
Manipulations and/or technical modifications of any kind, or damage due to the application of mechanical force, will void your warranty.
To read the warranty terms and conditions in full, see Service/Warranty Conditions on our website at bequiet.com.

Our General Terms and Conditions of Business also apply. For details please refer online under bequiet.com.

Manufacturer’s details
Listan GmbH & Co. KG | Biedenkamp 3a | 21509 Glinde | Germany
Visit the contact section on bequiet.com for the right regional service information.
Monday through Friday 09:00 – 17:30 (UTC+1)
Tel. 0049 40 736 7686 – 44 Fax 0049 40-7367686-69
Email: service@bequiet.com
Website: www.bequiet.com

Copyright

You are not allowed to reproduce, disclose, publish or store the contents of this documentation, or excerpts of it, without the prior written consent of Listan.
be quiet! is a registered trademark of Listan GmbH & Co. KG. Other products and company names mentioned in this documentation may be the brands or trademarks of their respective owners.
In accordance with company policy, all Listan products are subject to ongoing development. Listan reserves the right to make changes and improvements to any product described in this documentation without prior notice.
Under no circumstances shall Listan be held liable for loss of data or income, or for any specific, incidental, direct, or indirect damage, however it arises.
The content of this documentation represents the status at time of writing. Listan does not assume, whether expressed or implicit, any liability for the correctness or completeness of the content of this documentation, including, but not limited to the implicit guarantee of market suitability and fitness for a particular purpose, unless applicable laws or jurisdiction specifically stipulate such a liability.

Listan reserves the right to make changes to this documentation or to withdraw the documentation at any time without prior announcement.

Specification

Dimension (L x W x H)
492 x 220 x 470
Case Type
Mid Tower
Material
up to 0.8mm SECC, ABS plastic
M/B Support
ATX, M-ATX, Mini-ITX,
Front I/O
2x USB 3.0, HD audio jacks
Fan Speed Controller 3x
3-pin; Controller: 3-step (5V, 9V, 12V)
Cooler Height (mm)
165
Graphics Card Length (mm)
280 / 425 (without HDD cage)
PSU Length (mm)
210
PCI Slots
7
5.25” Bay
2
3.5” Bay
3
2.5” Bay
2 + 6
Cooling Fan (mm) / (rpm)
Front: 1x Pure Wings 2 140 / 900 Rear: 1x Pure Wings 2 120 / 1,200
Optional Cooling Fan (mm)
Front: 1x 140, 2x 120, 3x 120 (without 5.25” bay), Top: 3x 120, 2x 140
Radiator Support Top (mm)
120, 240, 360 (without 5.25” bay)
Radiator Support Front (mm)
120, 140 , 240, 280, 360, *without 5.25” bay

EXPLODED VIEW & PARTS

A Side Panel
B Front Panel
C 5.25” Bezels
D HDD Cages
E Intake Filters
F Pure Wings 2 | 140mm
H ODD cage
I Chassis Body
J Top Cover Bezel
K Front I/O panel / Fan Speed Controller
L PSU Air Filter
M Pure Wings 2 | 120mm

Front I/O and Media Ports

A HDD LED
B Reset Button
C Fan Speed Controller
D Power Button / Power LED
E USB 3.0
F Microphone
G Headphone

be-quiet-Pure-Base-600-Window-Orange-Silent-Essential-PC-
Cases-06

I/O Ports

be-quiet-Pure-Base-600-Window-Orange-Silent-Essential-PC-
Cases-07

Fan Speed Controller

Please plug the S-ATA connector of the fan speed controller to your power supply to take control of up to three 3-pin fans.

be-quiet-Pure-Base-600-Window-Orange-Silent-Essential-PC-
Cases-08

FAN COMPATIBILITY

OPTIONAL FAN MOUNTING FRONT be-quiet-Pure-Base-600-Window-Orange-
Silent-Essential-PC-Cases-10 OPTIONAL FAN MOUNTING TOP

RADIATOR SUPPORT

be-quiet-Pure-Base-600-Window-Orange-Silent-Essential-PC-
Cases-12

REMOVE EXTERNAL PARTS

SIDE PANEL REMOVAL

be-quiet-Pure-Base-600-Window-Orange-Silent-Essential-PC-
Cases-13 Loose the thumb screws to remove the steel side panel.

TOP BEZEL REMOVAL

Locate the 8 hooks under the top cover and press these inwards to release it Lift the top cover to release it from the chassis

Top cover bezel can be opened in two different positions

FRONT PANEL REMOVAL

Push the mounting hooks to release the front panel

Pull the front panel to release

MOTHERBOARD INSTALLATION

Fasten the screws to secure the motherboard

POWER SUPPLY (PSU) INSTALLATION

Insert the PSU into the case and fasten the screws to secure it

PCI /PCI-E ADD-ON CARD INSTALLATION

Remove the PCI slot bracket before installing the PCI/PCI-E add-on card; HDD cage may need to be repositioned for longer cards.

5.25” DEVICE (ODD) INSTALLATION

Remove the 5.25” bezel from inside the case

Insert the ODD into the 5.25” cage, secure the 5.25” device with thumb screws

ODD CAGE REMOVAL

Remove the screws from the front and right

Remove the screws from the left side to release the ODD cage

3.5” DEVICE (HDD) INSTALLATION

Release the HDD cage from the chassis by losing the three screws

Install the HDD with four screws inside the 3.5” slot be-quiet-Pure-Base-600
-Window-Orange-Silent-Essential-PC-Cases-27

2.5” DEVICE (SSD) INSTALLATION

Release the SSD bracket on the rear of motherboard tray

Install the SSD onto the SSD bracket Two SSD can be installed inside the 3.5” slot

AIR FILTER REMOVAL

Release the front panel, and release the air filter from inside

Remove the PSU dust filter by pulling it to the rear

Limited Warranty

Per the terms and conditions of this limited warranty as given below, be quiet! warrants its new products to be free of defects resulting from faulty materials and faulty manufacturing for the length of the warranty period.

APPLICABILITY
This non-transferable warranty is applicable to newly purchased, previously unopened be quiet! products and is enforceable by only the original consumer purchaser. Proof of purchase is required for warranty service, so should be retained. be quiet! does not provide warranty registration services.
WARRANTY PERIOD
For eligible products, parts and labor are warranted for the applicable warranty period from the date of purchase. The applicable warranty period varies by product model, and is identified in your user documentation, on the product package, or as listed below. Should any of these warranty periods differ, the longest specified warranty period will apply. Replaced products will be warranted for the remainder of the original warranty period or thirty days, whichever is longer.
EXCLUSIONS
The following are not covered by the warranty:
Normal wear and tear.
Any product which has been modified without permission from be quiet!, or on which the serial number or warranty sticker has been defaced, modified, or removed.
Damage, deterioration or malfunction resulting from:
Accident, abuse, misuse or improper use, neglect, connection to an improper voltage source, unauthorized product modification, or failure to follow instructions included with the product.
Fire, water, lightning, or other acts of nature.
Repair or attempted repair by anyone not authorized by be quiet!.
Shipping or transport damage (claims must be made with the carrier).
Any other cause which does not relate to a defect in materials or manufacturing workmanship.
Cartons, cases, batteries, cabinets, tapes, accessories or other consumables used with this product.
Be quiet!, Inc. does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose.
Removal or installation charges.
Shipping charges.
Any incidental charges.
EXCLUSION OF DAMAGES
Be quiet!‘s sole obligation and liability under this warranty is limited to the repair or replacement of a defective product at its option. be quiet! shall not, in any event, be liable for any special, incidental, indirect, or consequential damages whatsoever, including but not limited to loss of profits, revenue, or data (whether direct or indirect), damages resulting from interruption of service and loss of business, or for liability in tort relating to this product or resulting from its use or possession, even if be quiet! has been advised previously of the possibility of such damages.
LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph II.
LOCAL LAW AND YOUR WARRANTY
This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.
NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make any modification, extension, or addition to this warranty.
TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the Online Support section at www.bequiet.com for details and contact information. You will need to provide proof of purchase for warranty service.