EBYTE TX2400-JZLW-15 2.4GHz Rubber Antenna User Manual
- June 9, 2024
- ebyte
Table of Contents
EBYTE TX2400-JZLW-15 2.4GHz Rubber Antenna
Disclaimer
EBYTE reserves all rights to this document and the information contained
herein. Products, names, logos and designs described herein may in whole or in
part be subject to intellectual property rights. Reproduction, use,
modification or disclosure to third parties of this document or any part
thereof without the express permission of EBYTE is strictly prohibited.
The information contained herein is provided “as is” and EBYTE assumes no
liability for the use of the information. No warranty, either express or
implied, is given, including but not limited, with respect to the accuracy,
correctness, reliability and fitness for a particular purpose of the
information. This document may be revised by EBYTE at any time. For most
recent documents, visit www.ebyte.com.
Introduction
TX2400-JZLW-15 is a rubber antenna with 2.4Ghz frequency band, antenna size is about 165mm, IPEX-1 generation interface, suitable for 2.4Ghz frequency band equipment cabinet, control cabinet, logistics fleet, property security, hotel and catering, Chain companies, construction sites, outdoor self-driving radio enthusiasts, taxi teams and other related equipment.
Parameters
Electrical parameters
Center frequency| 2.4MHz
Antenna bandwidth| 2.4~2.5GHz
Antenna gain| 5dBi
Voltage standing wave ratio| ≤1.5
Polarization direction| Vertical polarization
Radiation direction| Omnidirectional
Input resistance| 50Ω
Power capacity| 20W
Other Parameters
Product size| 165mm
Feeder length| 150mm
( customized length available）
Weight| 20g
Color| Black
Interface| IPEX-1
Operating temp.| -40℃～+85℃
Storage temp.| -40℃～+85℃
Antenna features
VSWR
Smith Chart
FAQ
- The antenna frequency must match the frequency of the wireless device, otherwise the communication effect will be poor;
- The lower the communication frequency and the longer the wavelength, the better the diffraction performance;
- When there is a straight-line communication obstacle, the communication distance will be attenuated accordingly;
- Please pay attention to the antenna radiation direction, the incorrect installation direction of the antenna leads to a short transmission distance;
- The ground absorbs radio waves, and the test result near the ground is poor. It is recommended to increase the height;
- Sea water has a strong ability to absorb radio waves, so the seaside test results are not good;
- If there is a metal object near the antenna or placed in a metal shell, the signal attenuation will be very serious;
- The poor impedance matching between the antenna and the communication device will lead to poor communication effects.
About us
- Technical support: support@cdebyte.com
- Documents and RF Setting download link: www.ebyte.com
- Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com
- Phone: +86 028-61399028
- Web: www.ebyte.com
- Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>