be quiet Pro 901 Black Silent High End PC Cases User Manual
- June 1, 2024
- be quiet
Table of Contents
be quiet Pro 901 Black Silent High End PC Cases User Manual
Product Information
- Manufacturer: be quiet!
- Warranty: 3-year manufacturer’s warranty for the consumer (original purchase from authorized be quiet! dealers only)
- Copyright: You are not allowed to reproduce, disclose, publish, or store the contents of this documentation without prior written consent from Listen. General Terms and Conditions of Business apply. Details can be found online at bequiet.com.
Product Usage Instructions
- Warranty : To avail of warranty services, you need to provide the original receipt of purchase from an authorized be quiet! dealer. Keep it safely stored.
- Copyright : Do not reproduce, disclose, publish, or store the contents of this documentation without the prior written consent of Listen.
- General Terms and Conditions of Business: Refer online at bequiet.com for details.
- Manufacturer’s Details: The UK Authorised Representative for Be Quiet! products is ProductIP (UK) Ltd., located at 8, Northumberland Av. London WC2N 5BY.
- Ongoing Development: Listen products are subject to ongoing development. Listen reserves the right to make changes and improvements to any product described in this documentation without prior notice.
- Liability: Listen shall not be held liable for loss of data or income, or any specific, incidental, direct, or indirect damage arising from the use of their products.
- Documentation Changes: Listen reserves the right to make changes to this documentation or withdraw it at any time without prior announcement.
Please note that the above information is provided as per the user manual and may be subject to change.
INTRODUCTION
Warranty
- 3-year manufacturer’s warranty for the consumer (original purchase from authorized be quiet! dealers only)
- Your original receipt of purchase will be required before warranty services are rendered. Please store it carefully
- Manipulations and/or technical modifications of any kind, or damage due to the application of mechanical force, will void your warranty
- To read the warranty terms and conditions in full, see Service/Warranty Conditions on our website at bequiet.com
Our General Terms and Conditions of Business also apply. For details please refer online under bequiet.com Manufacturer’s details Listan GmbH Wilhelm-Bergner-Straße 11c 21509 Glinde Germany
Manufacturer’s details
Listan GmbH | Wilhelm-Bergner-Straße 11c | 21509 Glinde | Germany
- Tel. 0049 40 736 7686 – 44 Fax 0049 40-7367686-69
- Fax 0049 40-7367686-69
- Email : service@bequiet.com
- Website : www.bequiet.com
UK Authorized Representative (for authorities only) ProductIP (UK) Ltd. 8, Northumberland Av. London WC2N 5BY Copyright
- You are not allowed to reproduce, disclose, publish, or store the contents of this documentation, or excerpts of it, without the prior written consent of Listen
- Be quiet! is a registered trademark of Listan GmbH. Other products and company names mentioned in this documentation may be the brands or trademarks of their respective owners
- By company policy, all Listen products are subject to ongoing development. Listen reserves the right to make changes and improvements to any product described in this documentation without prior notice
- Under no circumstances shall Listen be held liable for loss of data or income, or any specific, incidental, direct, or indirect damage, however, it arises
- The content of this documentation represents the status at the time of writing. Listan does not assume, whether expressed or implicit, any liability for the correctness or completeness of the content of this documentation, including, but not limited to the implicit guarantee of market suitability and fitness for a particular purpose, unless applicable laws or jurisdiction specifically stipulate a such a liability Listan reserves the right to make changes to this documentation or to withdraw the documentation at any time without prior announcement.
SPECIFICATIONS
Motherboard compatibility | XL-ATX, E-ATX, ATX, M-ATX, Mini-ATX |
---|---|
Case Type | Full Tower |
PSU | PS2 ATX (not included) |
Dimensions (L x W x H in mm) | 604 x 254 x 569 |
Material | Steel (SGCC), ABS plastic, Aluminium |
Weight (kg) | Dark Base Pro 901 Black: 17.8 (net) / 20.9 (gross) Dark Base Pro |
901 White: 18.0 (net) / 21.3 (gross)
I/O Panel| 1x USB 3.2 Gen. 2 Type C, 4x USB 3.2, HD Audio (mic + audio), fan
controller, ARGB controller, I/O Button
PCI Slots| 8
Drive Bays| up to 16x 2.5″ (6 included)up to 7x 3.5″ (2 included)up to 1 x
5.25″ (1 included)
Preinstalled fans (mm) / (rpm)| Front: 2x Silent Wings 4 PWM 140 / 1900Rear:
1x Silent Wings 4 PWM 140 / 1900
Maximum fans (mm)| Front: 3x 140 / 120Top: 3x 140 / 120Bottom: 1x 140 /
120Side: 3x 120Rear: 1x 140 / 120
Optional radiators (mm)| Front: 120 / 140 / 240 / 280 / 360 / 420Top: 120 /
240 / 360Side: 120 / 240 / 360Rear: 120 / 140
Maximum Dimensions (mm)| CPU cooler: up to 190 PSU: up to 288GPU: 495ATX
motherboard: 350 (with HDD cage)E-ATX motherboard: 370 (with HDD cage)
ARGB connector| 3-pin 5V
CONTENTS
Images | Part Name | Quantity |
---|---|---|
Fan / Radiator bracket for multi mounting panel | 1 | |
E-ATX cable management cover | 1 | |
Mesh Panel Front | 1 | |
VGA Holder | 1 | |
VGA Holder for inverted layout | 1 | |
Airflow Cover PSU Shroud | 1 | |
ODD bracket | 1 | |
Screw Box | 1 | |
Velcro ties | 7 | |
Thumbscrew for VGA Holder | 1 | |
M5x20 Screws for front FANs | 4 | |
M3 Screws for ODD / SSD | 24 | |
6#32 Screws for Motherboard | 11 | |
6#32 Screws for ODD bracket | 4 | |
6#32 Screws for PSU | 4 | |
Nut for VGA Holder | 1 | |
Standoff for Motherboard | 3 | |
Wrench for motherboard standoffs | 1 | |
Screw sleeve for fans on front fan bracket | 4 |
EXPLODED VIEW AND DESCRIPTION OF PARTS
A | Window Side Panel | N | Front Panel |
---|---|---|---|
B | Bottom Dust filter | O | Mesh Panel Front |
C | ODD Bracket | P | Silent Panel Front |
D | Airflow Cover PSU Shroud | Q | HDD Slot Covers |
E | Silent Cover PSU Shroud | R | HDD Frame For Multi Mounting Panel |
F | PSU Shroud | S | Fan / Radiator Bracket For Multi Mounting Panel |
G | VGA Holder | T | HDD Cage |
H | Silent Wings 4 140mm | U | Mainboard Tray |
I | Top Fan / Radiator Bracket | V | Cable Management Tubes |
J | Silent Panel Top | W | Metal Side Panel |
K | Mesh Panel Top | X | HDD Covers for HDD Frame Right Side |
L | Front Fan / Radiator Bracket | Y | PSU Bracket |
M | Front Dust Filter | Z | PCI Bracket |
Position | Size (mm) |
---|---|
Top | 3x 140 / 120 |
Front | 3x 140 / 120 |
Side | 3x 120 |
Rear | 1x 140 / 120 |
PSU Cover | 1x 140 / 120 |
Position | Size (mm) |
---|---|
Top | 120 / 240 / 360 |
Front | 120 / 140 / 240 / 280 /360 / 420 |
Side | 120 / 240 / 360 |
Rear | 120 / 140 |
RADIATOR CLEARANCE
RADIATOR CLEARANCE
REMOVING THE WINDOW PANEL
REMOVAL AND INSTALLATION OF THE CASE FRONT
REMOVAL AND INSTALLATION OF THE CASE FRONT
CHANGING THE TOP COVER
REMOVING THE FRONT DUST FILTER
REMOVING THE BOTTOM DUST FILTER
INSTALLING FANS OR RADIATORS ON THE DETACHABLE TOP BRACKET
INSTALLING FANS ON DETACHABLE FRONT BRACKET
INSTALLATION OF ADDITIONAL BOTTOM FAN
INSTALLATION OF FANS ON THE SIDE PANEL
INSTALLATION OF RADIATOR ON THE SIDE PANEL
INSTALLATION OF DRIVES ON THE MULTI MOUNTING PANEL
INSTALLATION OF DRIVES INTO THE SINGLE HDD CAGE
INSTALLATION OF DRIVES INTO THE HDD CAGE
INSTALLATION OF SSDs ON THE BRACKET
INSTALLING THE ATX-MOTHERBOARD
INSTALLING THE E-ATX-MOTHERBOARD (30.5 x 27.5cm)
INSTALLING THE E-ATX-MOTHERBOARD
INSTALLING A GRAPHICS CARD
INSTALLING A GRAPHICS CARD VERTICALLY
* RISER CABLE (BGA12) for purchase
INSTALLATION OF ODD DRIVES
WIRELESS CHARGER
USING THE VGA HOLDER
USING THE VGA HOLDER FOR GRAPHICS CARDS WITH 4 PCI-E SLOTS
FAN CONTROLLER
ARGB CONTROLLER
Color Mode | Regular | Breath | Comet | Trail |
---|---|---|---|---|
White | 1 | 2 | 3 | 4 |
Red | 5 | 6 | 7 | 8 |
Green | 9 | 10 | 11 | 12 |
Blue | 13 | 14 | 15 | 16 |
Orange | 17 | 18 | 19 | 20 |
Purple | 21 | 22 | 23 | 24 |
Cyan | 25 | 26 | 27 | 28 |
All colors | 29 | 30 | Rainbow | OFF |
SYNCHRONIZATION ARGB INVERTED LAYOUT
Limited Warranty
As per the terms and conditions of this limited warranty as given below, be
quiet! warrants its new products to be free of defects resulting from faulty
materials and faulty manufacturing for the length of the warranty period.
I. APPLICABILITY
This non-transferable warranty applies to newly purchased, previously
unopened be quiet! products and is enforceable by only the original consumer
purchaser. Proof of purchase is required for warranty service, so should be
retained. be quiet! does not provide warranty registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted for the applicable
warranty period from the date of purchase. The applicable warranty period
varies by product model and is identified in your user documentation, on the
product package, or as listed below. Should any of these warranty periods
differ, the longest specified warranty period will apply. Replaced products
will be warranted for the remainder of the original warranty period or thirty
days, whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty:
- Normal wear and tear.
- Any product that has been modified without permission from Be Quiet! or on which the serial number or warranty sticker has been defaced, modified, or removed.
- Damage, deterioration, or malfunction resulting from:
- Accident, abuse, misuse or improper use, neglect, connection to an improper voltage source, unauthorized product modification, or failure to follow instructions included with the product.
- Fire, water, lightning, or other acts of nature.
- Repair or attempted repair by anyone not authorized by be quiet!
- Shipping or transport damage (claims must be made with the carrier).
- Any other cause which does not relate to a defect in materials or manufacturing workmanship.
- Cartons, cases, batteries, cabinets, tapes, accessories, or other consumables used with this product.
- be quiet!, Inc. does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose.
- Removal or installation charges.
- Shipping charges.
- Any incidental charges.
EXCLUSION OF DAMAGES
Be Quiet!‘s sole obligation and liability under this warranty is limited
to the repair or replacement of a defective product at its option. be quiet!
shall not, in any event, be liable for any special, incidental, indirect, or
consequential damages whatsoever, including but not limited to loss of
profits, revenue, or data (whether direct or indirect), damages resulting from
interruption of service and loss of business, or for liability in tort
relating to this product or resulting from its use or possession, even if be
quiet! has been advised previously of the possibility of such damages.
LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited
to those of merchantability or fitness for a particular purpose. The duration
of implied warranties is limited to the warranty length specified in
Paragraph. II. LOCAL LAW AND YOUR WARRANTY
This warranty gives you specific legal rights. You may also have other rights
granted under local law. These rights may vary. VII. NO OTHER WARRANTY No
be quiet! employee, dealer, or other agent is authorized to make any
modification, extension, or addition to this warranty. VIII.TO OBTAIN
TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the service section at
www.bequiet.com for details and contact information. You will need to provide
proof of purchase for warranty service. bequiet.com
References
- be quiet! - Silent PSUs, cases and PC cooling products. PSU calculator and cooler check for your PC
- Quiet.fr
- be quiet! - Silent PSUs, cases and PC cooling products. PSU calculator and cooler check for your PC
- Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>