SCHLAGE Crosbie lever User Manual

SCHLAGE Crosbie lever

Safety Information

• Read the precautions and instructions in this manual before installing and using this lock. Save this manual for future reference.

• To ensure a long lasting finish, remove the locks, or do not install the locks, prior to painting your door. Periodically clean the locks with mild soap and a soft cloth. Do not use abrasives or
  harsh chemicals, and avoid sharp or scratching objects.

• Before beginning the installation, please read and understand the entire manual.

• If the door needs to be drilled, be familiar with how to use your drill safely, and understand all the door preparation steps before proceeding.

Description

Tools Required

Pre-Installation

NOTE: If your door already has holes, skip to Installation

Tools Required

1. Using the template, mark the door and drill the holes, and chisel out a mortise.
2. Prepare the door jamb – using the strike plate as a pattern, drill the latch and screw holes, and chisel out a mortise until the strike plate fits flush.

NOTE: To assure proper lockset function, the holes in the door jamb must be drilled 1/2 in. (13 mm) deep.

Installation

INSTALLING THE LATCH

1. Attach the correct faceplate
   

2. Set the latch backset

3. Install the latch

INSTALLING THE LEVER/KNOB

NOTE: Levers installed in reverse will not affect the product’s performance.

SWITCHING THE HANDLES (IF DESIRED)

INSTALLING THE STRIKE PLATE

NOTE: If required, bend the adjustable tang on the strike to eliminate a loose fit between the door and the door stop.

NOTE: Ensure the lip faces away from the door.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>