ES02 True Wireless Bluetooth 5.0 Earbuds User Manual

ES02 True Wireless Bluetooth 5.0 Earbuds

Packaging list

Earphones ×1

|

Charging case ×1

---|---

Eartips ×3

|

USB Charging cable ×1

Manual ×1

|

Warranty Card ×1

Product overview

1. Earphone power display
2. Charging case power display
3. Charging slot
4. Magnetic charging pin
5. Multifunctional button
6. Earphone Mic and LED

Power On / Pairing

Mode 1 – with charging case

Power on: Take out the earphones from the charging case.
Pairing: Earphones will start pairing automatically with Right earphone Orange and White light flash alternatively
Pairing successful: earphone light off
Connection: Select ES02 from the device’s Bluetooth list.

Mode 2 – Earphones stand alone

Power on: Touch the multifunctional button for 3 seconds.
Release when you hear the prompt sound ‘Power on’ with Orange light on.
Pairing: Earphones will start pairing automatically with Right earphone Orange and White light flash alternatively.
Pairing successful: earphone light off
Connection: Select ES02 from the device’s Bluetooth list

Incoming call

Answer call / End call
Tap the left / right multifunctional button once

Reject call
Touch the left / right multifunctional button for 2 seconds

Music

Pause / Play
Tap the left / right multifunctional button once

Previous song
Double-tap the left multifunctional button

Next song
Double-tap the right multifunctional button

Decrease volume
Touch the left multifunctional button for 3 seconds

Increase volume
Touch the right multifunctional button for 3 seconds

Note:
Above functions are not supported when the earphone is used in single

Voice

Voice Assistant
After connection with device, triple-tap either multifunctional button to launch your Device’s Voice Assistant

Power off

Mode 1
Put the earphones back to the charging case, they will power off automatically

Mode 2
Touch either multifunctional button for 3 seconds to power off earphones

Single Mode

Single Mode

| Left earphone|

Right earphone

---|---|---

Step 1

| Turn off Bluetooth to disconnect the earphones Touch left / right multifunctional button for 3 seconds to power off earphones

Step 2

| Touch the left multifunctional button for 3 seconds with Orange and White light flash alternatively

Release when you hear prompt sound ‘Pairing’

| Touch the right multifunctional button for 3 seconds with Orange and White light flash alternatively

Release when you hear prompt sound ‘Pairing’

Step 3

| Select ES02 from the Bluetooth list

Charging

Earphones
Earphones orange light on: charging
L ED lights off: Fully charged
Note: It takes about 1.5 hours to fully charge the earphones

Charging case
White LED light rotates clockwise: charging
Display FU: full charged
Note: White LED light off in 30 seconds from beginning of charging

Safety Instruction

1. Please remove the films on the earphones before charging them. It takes about 1.5 hours to fully charge.
2. If you do not use the earphones for a long time, please charge the twins earphones and the charging box at least once every 3 months.
3. About connected Bluetooth device, the earphones will automatically connect it the next time.
4.  Keep the earphones and the packaging out of reach of children.
5. If the earphones come in contact with liquids, quickly wipe away. If submerged in the water, do not turn the earphones on until it is completely dried.
6. The earphones are sweat-proof and rain-proof. However, do not use it underwater (e.g. swimming). Warranty void if the earphones submerged in the water.
7. Do not use earphones in thunderstorm weather, the earphones may not work properly in the bad weather condition, and may increase the risk of being hit by lightning.
8. Earphones may not work properly under high temperature or high humidity condition.
9. Do not use while driving, cycling, operating machinery or performing other activities that require hearing surrounding sounds.
10. Using earphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised that you keep volume levels moderate to low at all times for your safety.

Frequently Asked Questions

1. The left and right earphones cannot pair or connect to Bluetooth?
   Method 1: Put the two earphones in charging case and take them out in about 1 second. They will pair automatically in about 5 seconds. Then reconnect Bluetooth device.
   Method 2: Take out the two earphones and turn them off by a 3-second long press. Reset them by a 10-sencond long press. Turn them on by a 2-second long press. Then reconnect Bluetooth device.

2. While playing music, only one earbud works, another doesn’t work?
   Put the earphones in charging case to check whether the silent earbud is in low power. If it is in low power, please fully charge it.
   If it is in enough power, please re-pair them by following steps mentioned in question 1.

3. How to reconnect Bluetooth if disconnected?
   a. Put the earbuds in charging case and take them out in 2 seconds
   b. Delete “ ” from the Bluetooth list, and turn off Bluetooth.
   c. Turn on Bluetooth and select “ ES02 ES02 ” from the Bluetooth list, and re-connect.

4. The earphones battery life is not last-long as expected?
   Fully charge the earphones at the first 2 times of charging.
   The built-in battery can be effectively used to have the expected battery life.

5. The earphones won’t charge?
   Check whether the earphones are well put in the charging case and whether there is any foreign object on the charging pin.

6. There are some unexpected pauses while calling and playing music?
   a. The earbuds are in low power, please charge them in time.
   b. There is an obstacle between earbuds and Bluetooth device.
   c. Out of Bluetooth range.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>