Intelligent Heart Rate Blood Pressure Bracelet User Guide
- June 7, 2024
- Intelligent
Table of Contents
Intelligent Heart Rate Blood Pressure Bracelet
User Guide
Bracelet
User Guide
Parts Introduction
Charge Method
The bracelet needs to be pop out at first when you receive the device (charged
by the corresponding charger). In charging, the bracelet will power on
automatically (charge method is as followed, charge on USB port or PC by
poping the host out)
Notes: charging direction connects the shorter wristband
Wearing Method
- wear behind the styloid process of The ulna is an optimum fit
- adjust the size according to the regulation hole, fasten the wristband buckle.
- the sensor should be close to the skin, avoid being moved.
Startup and Power off
- In the power-off state, ，have a long touch function key for at least three seconds to start up.
- In start-up state，switch to the main interface, have long touch function keys for at least three seconds to power off.
Bracelet Operation
- In the bracelet start-up state, have a short touch function keys to light screen or switch interface
- screen darkens automatically after the five-second non operation, users are able to change screen darkening time by connecting phone APP.
- switch to heart rate and blood pressure interface to test automatically, stop the test when leave interface.
Install the bracelet APP
Scan the following QR code or enter various markets to download and install “
FlagFit2.0”
http://a.app.qq.com/o/simple.jsp?pkgname=com.yc.flagfit2
https://itunes.apple.com/tw/app/id1260425360?mt=8
Compatibility： iOS 8. 0, Android 4. 4, and above system, Supporting Bluetooth 4.0.
Bluetooth connection： after pairing， the APP will save the
bracelet’s Bluetooth address automatically, when opening APP or running it in
the background, it will search automatically and connect the bracelet.
Data synchronization: in the APP homepage, manual drop-down can synchronize
data, seven-day off-line data can be saved by a bracelet, the more data there
is, the longer time can be synchronized, the latest time is about two minutes.
After synchronization, an accomplished synchronization hint will exist.
Setting→ Personal Setting
- Be able to set head portrait -gender-age- height-weight，personal information may increase data accuracy.
- Set your each-day exercise goal, a reasonable exercise plan improves physical fitness.
Sleep Monitoring Function
Start reminding switch in APP setting center to open reminding function, and
keep phone and bracelet in successful connection with Bluetooth,
vibrate to remind in receiving the message.
Call reminder： when the phone rings, the bracelet vibrates and shows the
caller’s name and ID.（if the caller’s name is saved in the phone, the name
will be shown, otherwise call’s ID is shown.）
Message reminder： in receiving message，the bracelet vibrates and displays
a message icon reminder: if the caller’s name is saved on the phone, the name
will be displayed, otherwise, the number will be displayed
QQ reminder： in receiving QQ information， the bracelet vibrates and
displays a QQ icon reminder
Wechat reminder： in receiving Wechat information, the bracelet vibrates
and displays the Wechat icon reminder.
Smart Alarm Clock： be able to set three alarm clocks, after setting, it
will synchronize into a bracelet； smart alarm clock is silent when going off,
the bracelet vibrates mildly, it supports offline work.
Sedentariness reminder： the default reminding time interval is one hour,
in the connection state, if users don’t exercise within one hour, the bracelet
will vibrate to remind users to exercise.
sleep monitoring function
Automatically recognize your sleeping state, monitor the whole sleeping
progress, analyze deep sleep hours and light sleep hours and help you make an
effective sleep plan. Sleep date is only checked in APP client.
Notes： sleep data is displayed only by wearing a bracelet in sleep
The main function interface
Main Interface
When Bluetooth icon is ，representing the bracelet disconnects with the phone.
When the Bluetooth icon is , showing a successful connection. After bracelet
and APP conne, s at first bracelet synchronizes steps, timedate and week.
Step Counter Interface
Display step counter，bracelet is in steps counter model automatically, wear
the bracelet on your wrist when users are walking and swing arms, bracelet
records walking steps according to swinging times.
Distance Interface
The distance will be counted and showed in this interface according to steps
and height set in APP.
Calorie Interface
Burning Calories will be counted and showed in this interface according to
walking steps and height set in App
Heart Rate Interface
In the heart rate monitoring interface, the heart rate monitoring model is
automatically entered. A dynamic real-time heart rate test is supported. In
the heart rate monitoring model, it ensures will be lower.
Notes of heart rate or blood pressure test
-In the test, the icon bounces and the heart rate LED light is at the bracelet back.
-In the test, the sensor should be close to the skin, avoid its accuracy being affected by external light.
-Keep test areas clean, sweat or stains will affect the test results.
blood pressure interface
Test
blood pressure when switch to the blood pressure interface, stop the test when
switching to the next interface. The last result or “ —/ –” will be shown when
testing without results. Or connect phone APP to test in blood pressure
interface. Test methods and notes are the same as that of the heart rate test.
Exercise Interface
In
the exercise interface, ，have a long press for 3 seconds to enter the exercise
interface, including four exercises, table tennis, tennis, badminton, and
cycling. Click to switch. have a long press for three seconds to exercise.
Have a long press for three seconds to drop out exercise
Message Interface
In the message interface, ，have a long press for three seconds to check ，click
to turn the page, drop out after checking messages or have a long press for
three seconds
Find Phone Interface
In the
connected state，click on finding phone options, vibration alarm or rings alarm
will be emitted by the phone.
Power-off Interface
In start-up interface, ，have a long press for three seconds to power off by
vibration Power- off by vibration
Precautions
- Please avoid being impacted intensively, too-hot temperature, and exposed consistently.
- Please don’t disassemble, repair or modify.
- The device charges with 5V500MA, overvoltage shall not be used to charge.
- Using environments between 0° and 45°，throwing into the fire is forbidden, avoid exploding.
- Please use a soft cloth to dry the bracelet before charging, otherwise
The device connection
At first, use, connect APP for calibration，after connecting successfully, the
bracelet will synchronize the time automatically, otherwise step counting and
sleep date are inaccurate.
charging points will be corroded, lead to charge fault.
- Please don’t touch chemical materials, such as gasoline, clean solvent, propyl alcohol, ethyl alcohol, or vermifuge.
- Please don’t use the device in the hyperbaric and high-magnetic environment
- If you have sensitive skin or a bracelet that is worn closely, you may feel uncomfortable.
- Please dry sweat on the wrist, wristband having touched soap, sweat, allergen, or pollution components for a long time may lead to itchy skin and allergies.
- If used regularly, suggest cleaning it each week. Wipe with a damp cloth, use mild soap to get rid of grease or dust.
- Wear bracelet is not suitable for having a hot bath
Common problems
Why waiting for 8 seconds before testing heart rate?
In testing heart rate, a long-time signal is needed to calculate your heart
rate.
What should we do when the Bluetooth is not connected?（connection/failure
reconnection or low- speed reconnection）
Ensure your device’s system is IOS8.0, Android 4.4 or above system, and
supports Bluetooth 4.0.
APP Functions and Setting
Personal information and exercise goals
Set your personal information before entering APP.
- Because of signal interference，, each connection time is not the same, if can’t get a connection for a long time, please ensure your operation in the non-magnetic or non-Bluetooth distribution environment.
- Close Bluetooth and then open it again.
- Close background applications or reboot your phone
- Don’t let the phone connect to other Bluetooth devices or functions at the same time.
- If APP runs in the background, if it isn’t, it may disconnect.
Be unable to detect bracelet
It isn’t searched by phone in bracelet Bluetooth broadcasting state, please
ensure your bracelet is in full charge, activated state and not bind other
phones, then place bracelets close to the phone, if it is still, please close
your phone Bluetooth, restart it after 20 seconds.
Why is the bracelet wore closely in resting heart rate?
Adopting light reflection will collect signals reflecting in sensors
bypassing your skin to calculate your heart rate. A loose wearing will make
ambient light enter into the sensor, affecting test accuracy.
Why do not receive reminders in the opening of the reminding function?
Android Phone： ensure phone in connection with bracelet, after
connection, open related limitations in phone setting, allow
“FlagFit2.0” APP to visit calls, messages, address list and keep ”Flag
Fit2.0” running in the background. If security software is installed, please
add
“ FlagFit2.0” into the trusted list.
Apple Phone： if there is no reminder after connection, restart your phone to
reconnect is suggested, in reconnecting, a reminder will appear only by
clicking on pairing when an interface of Bluetooth The pairing requirement is
popped out.
Is the bracelet waterproof?
IP67 water-proof and dust-resistant level, (water temperature not beyond
35°，depth, not over 1m, time not over 30mins) you can wear in washing hands,
raining, cold showing and washing cars.
Does the Bluetooth connection need to open at all times? Is there data when
closing it?
Prior to synchronizing data，data is save in host（be able to save sevenday
data）. When the phone connects with bracelet Bluetooth successfully, bracelet
data will be uploaded automatically into the phone client, please synchronize
data in time.
Notes： if you want to open calling and message reminding functions,
Bluetooth must keep in the connection state, the alarm clock supports offline
work.
Mobile APP use
Sedentary reminder： the bracelet vibrates to remind if no exercising for
a constant time.
Light screen by raising hand： when raising a hand, the screen will be on
automatically.
Smart anti-lost： open APP floating window in phone setting’s authority
management.
When the phone is far away from the bracelet, the phone will remind. It will
not remind in closing phone Bluetooth.
Shake a photo： only by shaking your bracelet, a photo is taken simply.
Quiet hours： after opening quiet hours，it will close the light screen by
raising a hand, bracelet vibration, and APP notifications during this period.
Wechat exercise： start Wechat to connect with each day’s smart-wearing
interface, compete for exercise ranks with friends only by following them.
Notes： if unbinding the bracelet, please ignore Bluetooth in the phone
setting, otherwise be unable to search bracelet in the next use.
Basic parameters
Device type| Intelligent heart rate blood pressure bracelet| Battery| Lithium-
ion polymer
---|---|---|---
Viewing screen| 0.96 inch TFT| Battery model| 361525
Product weight| 30g| Battery capacity| 100mAh
length| 25.5cm| Battery voltage| 3.7V
Water-proof level| Ip67| Power of battery| 0.296Wh
Wristband Material| TPU strap| Package Included| host、specification、wristband
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>