somogyi NPD 1-BK Grounded Plug Side Cable Instruction Manual
- June 3, 2024
- SOMOGYI
Table of Contents
somogyi NPD 1-BK Grounded Plug Side Cable
GROUNDED PLUG WITH CABLE OUTLET ON THE SIDE
Connection
Installation can be made by qualified personnel only if the unit is voltage free! Unscrew the screw, then unfold the plastic cover of the plug. Unscrew the cable strain relief. Pull this flexible strain relief on the wire, and cut it to the proper size if needed. Remove the sheath insulation 4 cm long. Strip the earth, neutral, and phase wires 10 mm long. Connect the earth (green/yellow) wire to the middle, to the terminal marked with, then connect the neutral (blue) and phase (brown or black) wires as well. Fix the cable sheath insulated portion with the strain relief. Fold up the two halves of the plug, and make sure to fit the strain relief into its place. Screw the two halves of the plug. Warnings: For indoor use only, in a dry place! Temperature range: 0 – 40 °C. Cross section of applicable wire: 1,0 mm2, for 1,4 – 2,0 m long wires/1,5 mm2, for 1,4 – 5,0 m long wires. Strain relief must be fixed only on sheat insulated part of the wire!
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of products at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
Producer
SOMOGYI ELEKTRONIC® • H – 9027 • Győr, Gesztenyefa út 3. •
www.somogyi.hu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>